350-501 Questions and Answers
Question # 1
router(config)# route-map blackhole-trigger
router(config-route-map)# match tag 777
router(config-route-map)# set ip next-hop 10.0.1.1
router(config-route-map)# set origin igp
router{config-route-map)# set community no-export
Refer to the exhibit. EIGRP is running across the core to exchange internal routes, and each router maintains iBGP adjacency with the other routers on the network. An operator has configured static routes on the edge routers R1 and R2 for IP address 10.0.1.1, which is used as a black hole route as shown. Which configuration should the operator implement to the management router to create a route map that will redistribute tagged static routes into BGP and create a static route to blackhole traffic with tag 777 that is destined to the server at 192.168.10.100?
Question # 2
Refer to the exhibit. An engineer must Implement a traceroute operation to verity the R1 point-to-multipoint LSP connections. The traceroute operation must return all labels and hop-by-hop IP addresses for destinations 10.20.0.1. 10.30.0.1, and 10.40.0.1. and the maximum number of hops is 4. Which command must be executed to meet the requirements?
Question # 3
An engineer is configuring IEEE 802.1 ad on the access port on a new Cisco router. The access port handles traffic from multiple customer VLANs, and it is expected to mark all customer traffic to the same VLAN without dropping any traffic. Which configuration must the engineer apply?
A)
B)
C)
D)
