RH302 RHCE (Redhat Certified Engineer) Question and Answers

Do the following steps as:

1.useradd eric

Very tricky question given to you that this user should not belongs to sysadmin group.

Do the following steps as:

1. Insert the CD on CD-ROM and start the system.

2. In Boot: Prompt typelinux askmethod

3. It will display the language, keyboard selection.

4. It will ask you for the installation method.

5. Select the NFS Image from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the NFS Server Name and Redhat Enterprise Linux Directory.

Specify the NFS Server: 172.24.254.254

Directory: /var/ftp/pub

8. After Connecting to the NFS Server Installation start in GUI. Go up to the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10.Create the two RAID partitions having equal size of remaining all free space.

11.Click on RAID button

12.Type mount point /data

13.Select RAID Level 0

14.Click on ok

15. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Base

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1.usermod -G sysadmin john

2.usermod –G sysadmin jane

3.Verify by reading /etc/group file

Using usermod command we can make user belongs to different group. There are two types of group one primary and another is secondary. Primary group can be only one but user can belongs to more than one group as secondary.

usermod -g groupname usernameTo change the primary group of the user

usermod -G groupname usernameTo make user belongs to secondary group.

Do the following steps as:

useradd user1

useradd user2

useradd user3

passwd user1

passwd user2

passwd user3

We create the user using useradd command and we change the password of user using passwd command. If you want to set the blank password use: passwd -d username.

Do the following steps as:

1.chgrp sysusers /storage

2.Verify using ls -ld /storage command. You should get like

drwxr-x--- 2 root sysusers 4096 Mar 16 17:59 /storage

chgrp command is used to change the group ownership of particular files or directory.

Another way you can use the chown command.

chown root:sysusers /storage

chown or chgrp command is used to change the ownership.

Syntax of chown: chown [-R] username:groupname file/directory

Syntax of chgrp: chgrp [-R] groupname file/directory

Whenever user creates the file or directory, the owner of that file/directory automatically will be that user and that user’s primary group name.

To change group owner ship

chgrp training /data Which set the Group Ownership to training

or

chown root.training /dataWhich set the user owner to root and group owner to training group.

Verify /data using: ls -ld /data

You will get: drwxr-xr-x 2 root training …………..

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the Language, keyboard selection.

4. It will ask you for the installation method.

5. Select the HTTP from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the Web site name and Redhat Enterprise Linux Directory.

Specify the HTTP Server: 192.168.0.254

Directory: rhel5Because Default Directory for http is /var/www/html

8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should be

care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.

Do the following steps as:

1. use the authconfig --nisserver=192.168.0.254 --nisdomain=rhce.com --update or system-config-authentication

2. Click on Enable NIS

3. Type the NIS Domain: rhce.com

4. Type Server 192.168.0.254 then click on next and ok

5. You will get a ok message.

6. vi /etc/auto.master and write at the end of file

/home/stationx /etc/auto.home --timeout=60

7. vi /etc/auto.home and write

*-rw,soft,intr192.168.0.254:/home/stationx/&

Note: please specify your station number in the place of x.

8. Service autofs restart

9. Login as the rhce1 or rhce2 or rhce3 on another terminal will be

Success.

According to question, rhce.com domain is already configured. We have to make a client of rhce.com domain and automatically mount the home directory on every client. To make a member of domain, we use the autheconfig or system-config-authentication command. There a are lots of authentication server i.e NIS, LDAB, SMB etc. NIS is a RPC related Services, no need to configure the DNS, we should specify the NIS server address.

Here Automount feature is available. When user tried to login, home directory will automatically mount. The automount service reads the configuration from /etc/auto.master file.

On /etc/auto.master file we specified the mount point the configuration file for mount point.

Do the following steps as:

1.chmod 770 /storage

2.Verify using : ls –ld /storage

Preview should be like:

drwxrwx--- 2 root sysusers 4096 Mar 16 18:08 /storage

To change the permission on directory we use the chmod command. According to the question that only the owner user (root) and group member (sysusers) can fully access the directory so: chmod 770 /archive

At exam time read the Lab Scenario carefully. Actually there are two different networks one is 192.168.0.0/24 where your system resides know as example.com domain and another is 192.168.1.0/24 know as cracker.org domain.

One server named sever1.example.com having 192.168.0.254 and 192.168.1.254 is running in your exam. If you make a gateway to that server, you will can ping because IP forwarding is enabled on that server.

1.vi /etc/sysconfing/network

NETWORKING=yes

HOSTNAME=station?.example.com

GATEWAY=192.168.0.254

2.service network restart

Or

1.vi /etc/sysconfig/network-scripts/ifcfg-eth0

DEVICE=eth0

ONBOOT=yes

BOOTPROTO=static

IPADDR=X.X.X.X

NETMASK=X.X.X.X

GATEWAY=192.168.0.254

2.ifdown eth0

3.ifup eth0

Note: If gateway is specified in both file, default gateway takes from interface specific file.

Do the following steps as:

Use netconfig command

Enter the IP Address as given station number by your examiner: example: 172.24.0.1

Enter Subnet Mask

Enter Default Gateway and primary name server

press on ok

ifdown eth0

ifup eth0

verify using ifconfig

In the lab server is playing the role of router, IP forwarding is enabled. Just set the Correct IP and gateway, you can ping to 172.25.254.254.

Do the following steps as:

1.rpm –ivhftp://server1/example.com/pub/updates/zsh-*

or

1.Login to ftp server : ftpftp://server1.example.comusing anonymous user.

2.Change the directory: cd pub and cd updates

3.Download the package: mget zsh-*

4.Quit from the ftp prompt : bye

5.Install the package

6.rpm -ivh zsh-*

7.Verify Either package installed or not : rpm -q zsh

Do the following steps as:

1.First check the size of Logical Volume: lvdisplay /dev/vo/myvol

2.Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol

3.Make Available the size on online: ext2online /dev/vo/myvol

4.Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol

5.Verify that the size comes in online or not: df -h

We can extend the size of logical Volume using the lvextend command. As well as to decrease the size of Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical Volume without unmount as well as we can bring the size of Logical Volume on online using ext2online command.

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

This error occurred in your system before showing welcome redhat linux. That means problem in grub boot loader.

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

OR

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.

By Default system accept the logs only generated from local host. To accept the Log from other host configure:

vi /etc/sysconfig/syslog

SYSLOGD_OPTIONS="-m 0 -r"

Where

-m 0 disables 'MARK' messages.

-r enables logging from remote machines

-x disables DNS lookups on messages recieved with -r

service syslog restart

Do the following steps as:

1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.

# echo “1” >/proc/sys/net/ipv4/ip_forward

2. /etc/sysctl.confwhen System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file /etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter.

net.ipv4.ip_forward=1

Here 0 means disable, 1 means enable.

1. vi /etc/resolv.conf

Write : nameserver 192.168.0.254

Do the following steps as:

1.vi /etc/sysconfig/network

GATEWAY=192.168.0.254

OR

vi /etc/sysconf/network-scripts/ifcfg-eth0

DEVICE=eth0

BOOTPROTO=static

ONBOOT=yes

IPADDR=192.168.0.?

NETMASK=255.255.255.0

GATEWAY=192.168.0.254

2.service network restart

Do the following steps as:

ftpftp.server1.example.com

Download thewww.html

move the downloaded file into /var/www/html

Rename the file into index.html

Check using linkshttp://stationx.example.com

/var/www/html is the default directory for httpd service. Index.html is the default directory index. To set the default page without configuring virtualhost copy the file as a index.html in /var/www/html.

Do the following steps as:

1.vi /etc/httpd/conf/httpd.conf

<VirtualHost 192.100.0.1>

ServerNamewww.abc.com

DocumentRoot /var/www/abc/

<Directory /var/www/abc>

Order Allow, Deny

Allow from .example.com

</Directory>

DirectoryIndexindex.html

ServerAdminwebmaster@abc.com

ErrorLog logs/error_abc.logs

CustomLog logs/custom_abc.logs common

</VirtualHost>

2.Create the directory and index page on specified path. (Index page can download fromftp://server1.example.comat exam time)

3.service httpd start|restart

4.chkconfig httpd on

Order allow, denyAllows explicitly allowed clients, denies everyone else; clients matched by both allow and deny are denied.

Order deny, allowdenies explicitly denied clients, allows everyone else, clients matched by both allow and deny are allowed.

Do the following steps as:

1.iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -p tcp -j SNAT –to-source 202.2.2.2.

POSTROUTINGThis filter point handles packets immediately prior leaving the system.

When Packets leave the system all’s source address change to 202.2.2.2 and can access the internet.

iptables is the build-in firewall tools, used to filter the packets and for nat. By identifying Source Address, Destination Address, type of protocol, source and destination port we can filter the packets.

-sSource Address

-dDestination Address

-pLayer 3 Protocol

-dDestination Address

--sportSource Prot

--dportDestination Port

-iIncoming Interface

-oOutgoing Interface

-tTable either filter or nat or mangle

-AChain can be either INPUT, OUTPUT, FORWARD, PREROUTING, POSTROUTING.

Do the following steps as:

1.vi /etc/exports

/local*.example.com(rw,sync) trusted.cracker.org(ro,sync)

service nfs start | restart

service portmap start | restart

chkconfig nfs on

chkconfig portmap on

In Linux to share the data we use the /etc/exports file. Pattern is:

Pathclient(permission)

Shared Directory Path, Client can be single host or domain name or ip address. Permission should specify without space with client lists in parentheses. NFS is RPC service so portmapper service should restart after starting the nfs service. We can specify multiple clients’ list separating by space with different shared option.

Do the following steps as:

1.vi /etc/security/time.conf

login;*;user1|user2|user3;Al0900-1700

2.vi /etc/pam.d/login

accountrequiredpam_time.so

For Time based authentication, we should configured in /etc/security/time.conf

Syntax of /etc/security/time.conf

services;ttys;users;times

services

is a logic list of PAM service names that the rule applies to.

ttys

is a logic list of terminal names that this rule applies to.

users

is a logic list of users to whom this rule applies.

times

the format here is a logic list of day/time-range entries the days are specified by a sequence of two character entries, MoTuSa for example is Monday Tuesday and Saturday. Note that repeated days are unset MoMo = no day, and MoWk = all weekdays bar Monday. The two character combinations accepted are

Mo Tu We Th Fr Sa Su Wk Wd Al

the last two being week-end days and all 7 days of the week respectively. As a final example, AlFr means all days except Friday.

pam_time modules checks the file /etc/security/time.conf for authentication. So, we should call the pam_time modules in /etc/pam.d/login.

Do the following steps as:

1.ftp ftp://server1.example.com

2.Login as an anonymous and download the file.

3.Copy the file in /var/www/html if you downloaded in another location.

4.service httpd restart

5.Test using links: links http://station?.example.com

Note: In examination Lab DNS will configure for every stations.

Do the following steps as:

1.vi /etc/samba/smb.conf

[global]

netbios name=station?

workgroup = mygroup

server string=Share from Linux Server

security=user

smb passwd file=/etc/samba/smbpasswd

encrypt passwords=yes

[data]

path=/data

writable=yes

public=no

browsable=yes

valid users=user1 user2

2.smbpasswd –a user1

3.smbpasswd –a user2

4.service smb start | restart

5.chkconfig smb on

Samba servers helps to share the data between linux and windows. Configuration file is /etc/samba/smb.conf. There are some pre-defined section, i. globaluse to define the global options, ii. Printersuse to share the printers, iii. homesuse the share the user’s home directory.

Security=uservalidation by samba username and password. May be there are other users also. To allow certain share to certain user we should use valid users option.

smbpasswdHelps to change user’s smb password. –a option specifies that the username following should be added to the local smbpasswd file.

Do the following steps as:

1.vi /etc/samba/smb.conf

[global]

netbios name=station?

workgroup=station?

security=user

smb passwd file=/etc/samba/smbpasswd

encrypt passwords=yes

hosts allow= .example.com

[data]

path=/data

public=no

writable=no

browsable=yes

2.smbpasswd -a eric

3.service smb start

4.chkconfig smb on

/etc/samba/smb.conf. There are some pre-defined section, i. globaluse to define the global options, ii. Printersuse to share the printers, iii. homesuse the share the user’s home directory.

Security=uservalidation by samba username and password. May be there are other users also. To allow certain share to certain user we should use valid users option.

smbpasswdHelps to change user’s smb password. –a option specifies that the username following should be added to the local smbpasswd file.

Do the following steps as:

1.vi /etc/security/time.conf

login;*;user15|user16;Sa0000-2400

2.vi /etc/pam.d/login

accountrequiredpam_time.so

For Time based authentication, we should configured in /etc/security/time.conf

Syntax of /etc/security/time.conf

services;ttys;users;times

services

is a logic list of PAM service names that the rule applies to.

ttys

is a logic list of terminal names that this rule applies to.

users

is a logic list of users to whom this rule applies.

times

the format here is a logic list of day/time-range entries the days are specified by a sequence of two character entries, MoTuSa for example is Monday Tuesday and Saturday. Note that repeated days are unset MoMo = no day, and MoWk = all weekdays bar Monday. The two character combinations accepted are

Mo Tu We Th Fr Sa Su Wk Wd Al

the last two being week-end days and all 7 days of the week respectively. As a final example, AlFr means all days except Friday.

pam_time modules checks the file /etc/security/time.conf for authentication. So, we should call the pam_time modules in /etc/pam.d/login.

Do the following steps as:

1.vi /etc/hosts.deny

vsftpd:ALL EXCEPT .example.com

or

1.vi /etc/hosts.deny

vsftpd:ALL

2.vi /etc/hosts.allow

vsftpd:.example.com

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

- Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.

Do the following steps as:

1.vi /etc/exports

/data*.example.com(rw,sync)

2.service nfs start

3.service portmap restart

4.chkconfig nfs on

5.chkconfig portmap on

In Linux to share the data we use the /etc/exports file. Pattern is:

Pathclient(permission)

Shared Directory Path, Client can be single host or domain name or ip address. Permission should specify without space with client lists in parentheses.

Outside the LAN means my133t.org. All host on exam on example.com domain and outside domain means cracker.org.

To block the mail coming from cracker.org

1.vi /etc/mail/access

@my133t.orgREJECT

2.service sendmail start | restart

3.chkconfig sendmail on

Do the following steps as:

1.vi /etc/security/limits.conf

user1hardnproc7

2.vi /etc/pam.d/system-auth

sessionrequired/lib/security/pam_limits.so

To limit the number of process or number of logins, we should configure on /etc/security/limits.conf. First Columns contains the username separated by comma or @group name. Second column either hard or soft limits. Third columns called the item, maxloigns or nproc etc.

To identify the session of users we should call the pam_limits module in /etc/pam.d/system-auth.

Do the following steps as:

1.vi /etc/security/limits.conf

user1,user2-maxlogins1

@training-maxlogins5

2.vi /etc/pam.d/system-auth

sessionrequired/lib/security/pam_limits.so

To limit the number of process or number of logins, we should configure on /etc/security/limits.conf. First Columns contains the username separated by comma or @group name. Second column either hard or soft limits. Third columns called the item, maxloigns or nproc etc.

To identify the session of users we should call the pam_limits module in /etc/pam.d/system-auth.

Do the following steps as:

1.vi /etc/httpd/conf.d/ssl.conf

ServerNamewww.rhce.com

DocumentRoot /var/www/rhce

DirectoryIndex index.html index.htm

ServerAdminwebmaster@rhce.com

SSLEngine on

SSLCertificateFile/etc/pki/tls/certs/localhost.crt

SSLCertificateKeyFile/etc/pki/tls/private/localhost.key

2.cd /etc/httpd/conf

3.make testcert

4.Create the directory and index page on specified path. (Index page can download fromftp://server1.example.comat exam time)

Check the SELinux context of index page , should like this:

-rw-r--r-- root root system_u:object_r:httpd_sys_content_t /var/www/html/index.html

If SELinux Context is mismatched, use the restorecon –R /var command

5.service httpd start|restart

6.chkconfig httpd on

Apache can provide encrypted communications using SSL (Secure Socket Layer). To make use of encrypted communication, a client must request to https protocol, which is uses port 443. For HTTPS protocol required the certificate file and key file.

Do the following steps as:

ftpftp.server1.example.com

Download thewww.html

Check the SELinux context of index page , should like this:

-rw-r--r-- root root system_u:object_r:httpd_sys_content_t /var/www/html/index.html

If SELinux Context is mismatched, use the restorecon –R /var command

move the downloaded file into /var/www/html

Rename the file into index.html

Check using linkshttp://stationx.example.com

/var/www/html is the default directory for httpd service. Index.html is the default directory index. To set the default page without configuring virtualhost copy the file as a index.html in /var/www/html.

IMAP is a very usefully protocol, but it lacks encryption. The dovecot package distributed with RHEL includes the ability to use IMAP over SSL, This requires the creation of a PEM format certificate.

cd /etc/pki/tls/ and remove the cert.pem.

Go the /etc/pki/tls/certs then use:

make dovecot.pem : Which generates the dovecot.pem certificate by reading MakeFile

Enable the imaps with Certificate and Key file protocol from /etc/dovecot.conf

vi /etc/dovecot.conf

protocols = imap imaps

ssl_cert_file = /etc/pki/dovecot/certs/dovecot.pem

ssl_key_file = /etc/pki/dovecot/private/dovecot.pem

service dovecot restart : Restart the Dovecot service

Do the following steps as:

1.vi /etc/exports

/storage*.example.com(rw,sync)

2.service nfs start

3.service portmap restart

4.chkconfig nfs on

5.chkconfig portmap on

In Linux to share the data we use the /etc/exports file. Pattern is:

Pathclient(permission)

Shared Directory Path, Client can be single host or domain name or ip address. Permission should specify without space with client lists in parentheses.

By Default system accept the logs only generated from local host. To accept the Log from other host configure:

vi /etc/sysconfig/syslog

SYSLOGD_OPTIONS="-m 0 -r"

Where

-m 0 disables 'MARK' messages.

-r enables logging from remote machines

-x disables DNS lookups on messages recieved with -r

service syslog restart

We can control the services for current session and for next boot time also. For current Session, we use service servicename start or restart or stop or status. For automatically on next reboot time:

chkconfig servicename on or off

eg: chkconfig nfs on

chkconfig portmap on

or

ntsysv

Select the nfs and portmap services.

Reboot the system and identify whether services are running or not.

#vi /etc/resolv.conf

nameserver 172.24.254.254

# dig server1.example.com

#host server1.example.com

DNS is the Domain Name System, which maintains a database that can help your computer translate domain names such as www.redhat.com to IP addresses such as 216.148.218.197. As no individual DNS server is large enough to keep a database for the entire Internet, they can refer requests to other DNS servers.

DNS is based on thenameddaemon, which is built on the BIND (Berkeley Internet Name Domain) package developed through the Internet Software Consortium

Users wants to access by name so DNS will interpret the name into ip address. You need to specify the Address if DNS server in each and every client machine. In Redhat Enterprise Linux, you need to specify the DNS server into /etc/resolv.conf file.

After Specifying the DNS server address, you can verify using host, dig and nslookup commands.

To understand the role of a boot loader, take a step back from Linux. When you boot your computer, the BIOS starts by detecting basic hardware, including your hard drives. Once it's done, it looks for the boot loader on the Master Boot Record of the first available disk. If you're working with an older PC, the BIOS can't find your boot loader unless it's located within the first 1,024 cylinders of the hard disk.

Newer BIOSes overcome this problem with Logical Block Addressing, which is also known as LBA mode. LBA mode reads 'logical' values for the cylinder, head, and sector, which allows the BIOS to 'see' a larger disk drive.

If you have multiple hard drives, there is one more caveat. If your drives are IDE hard drives, the /boot directory must be on a hard drive attached to the primary IDE controller. If your drives are all SCSI hard drives, the /boot directory must be located on a hard drive with SCSI ID 0 or ID 1. If you have a mix of hard drives, the /boot directory must be located on either the first IDE drive or a SCSI drive with ID 0. In other words, this is not an issue on the Red Hat exams unless the computer that you're tested on has more than two hard drives. And I believe that's less likely, as that would increase the cost of the exam.

If you are getting the Kernel panic error, it means it is boot loader related problem. Redhat Enterprise Linux uses the GRUB boot loader. You can pass the kernel parameter from the boot loader as well as you can correct the kernel parameter passing from boot loader from GRUB screen at boot time.

GRUB boot loader configuration file is: /etc/grub.conf

And Correct Configuration is:

default=0

timeout=5

splashimage=(hd0,0)/grub/splash.xpm.gz

hiddenmenu

title Red Hat Enterprise Linux ES (2.6.9-5.EL)

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Probably miss-configured the boot loader, so giving this problem. You can pass the correct parameter from GRUB prompt:

Table 3-3:GRUB Editing Commands

Command

Description

b

Boot the currently listed operating system

d

Delete the current line

e

Edit the current line

o

Create an empty line underneath the current line

O

Create an empty line above the current line

If you know all parameters and sequence of the boot loader you can enter in command prompt also.

Press c on GRUB screen.

Grub>root (hd0,0)

grub>kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

grub>initrd /initrd-2.6.9-5.EL.img

grub>boot

Do the following steps as:

hostname station?.example.comThis will set the host name only for current session. To set hostname permanently.

vi /etc/sysconfig/network

HOSTNAME=station?.example.com

service network restart

Do the following steps as:

1. Use fdisk /dev/hdaTo create new partition.

Type nFor New partition

It will ask for Logical or Primary Partitions. Press l for logical.

It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.

Type the Size: +100MYou can Specify either Last cylinder of Size here.

Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that means Linux Native.

Type t to change the System ID of partition.

Type Partition Number

Type 82 that means Linux Swap.

Press w to write on partitions table.

Either Reboot or use partprobe command.

mkswap /dev/hda?To create Swap File system on partition.

swapon /dev/hda?To enable the Swap space from partition.

free –mVerify Either Swap is enabled or not.

vi /etc/fstab

/dev/hda?swapswapdefaults0 0

Reboot the System and verify that swap is automatically enabled or not.

When root unable to login into the system think:

1. Is password correct?

2. Is account expired?

3. Is terminal Blocked?

Do these Steps:

Boot the System on Single user mode.

Change the password

Check the account expire date by using chage –l root command.

If account is expired, set net expire date: chage –E “NEVER” root

Check the file /etc/securettyWhich file blocked to root login from certain terminal.

If terminal is deleted or commented write new or uncomment.

Reboot the system and login as a root.

This is boot related problem. There will be same questions repeated two times but problem is different.

First When you restart the system you will get the Error:

File Not Found

mount: error 15 mounting ext3

mount: error 2 mounting none

switchroot: mount failed: 22

umount /initrd/dev/: 2

Kernel Panic: no syncing: Attempted to kill init !

Restart the System

Check the grub boot loader configuration by pressing e shortcut key.

You will see like:

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root= / rhgb quiet

initrd /initrd-2.6.9-5.EL.img

OR

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/root rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Then Edit Boot loader to make like

root (hd0,0)

kernel /vmlinuz-2.6.9-5.EL ro root=LABEL=/ rhgb quiet

initrd /initrd-2.6.9-5.EL.img

Check all lines and edit as same as above. Press b to boot the system

After booting the system you should correct the /etc/grub.conf file.

If still you are getting Error likeFile not found, it seems that either kernel file or initrd file is missing. To troubleshoot with these problem, boot the system on rescue mode.

linux rescue

chroot /mnt/sysimage

Check the files on /boot, if not available install the kernel package from ftp or nfs server

Create the initrd image file on boot using: mkinitrd initrd-2.6.9-5.EL.img `uname –r`

Do the following steps as:

Think while Problems occurred on booting System on Runlevel 5 (X Window).

/tmp is full or not

Quota is already reached

Video card or resolution or monitor is misconfigured.

xfs service is running or not.

Do These:

1.df –h /tmp/tmp is full remove the unnecessary file

quota usernameif quota is already reached remove unnecessary file from home directory.

Boot the System in runlevel 3.you can pass the Kernel Argument from boot loader.

Use command: system-config-displayIt will display a dialog to configure the monitor, Video card, resolution etc.

Set the Default Runlevel 5 in /etc/inittab

id:5:initdefault:

6.Reboot the System you will get the GUI login Screen.

Note: Examiner will provide you the Installation startup CD. And here mentioned size may vary see on the exam paper.

1.Insert the CD on CD-ROM and start the system.

2.In Boot: Prompt typelinux askmethod

3. It will display the Language, keyboard selection.

4. It will ask you for the installation method.

5. Select the HTTP from the list

6. It will ask the IP Address, Net mask, Gateway and Name Server. Select Use

Dynamic IP Configuration: because DHCP Server will be configured in your exam lab.

7. It will ask for the Web site name and Redhat Enterprise Linux Directory.

Specify the HTTP Server: 192.168.0.254

Directory: rhel4Because Default Directory for http is /var/www/html

8. After Connecting to the HTTP Server Installation start. Go upto the partition screen by selecting the different Options.

9. Create the partition According to the Question because Size and what-what partition should you create at installation time is specified in your question

10. Then select the MBR Options, time zone and go upto package selections.

It is another Most Important Time of installation. Due to the time limit, you should be

care about the installation packages. At Exam time you these packages are enough.

X-Window System

GNOME Desktop

(these two packages are generally not required)

Administration Tools.

System Tools

Windows File Server

FTP Servers

Mail Servers

Web Servers

Network Servers

Editors

Text Based Internet

Server Configuration Tools

Printing Supports

When installation will complete, your system will reboot. Jump for another Question.