HQT-4420 Hitachi Vantara Qualified Professional - Content Platform Installation Question and Answers

When performing a six-drive upgrade on an HCP G10 with local storage:

RAID level and Virtual Disks will be created automatically (A):This is correct. The system automatically handles the RAID configuration and creation of virtual disks to ensure that the new drives are correctly integrated into the existing storage structure.

The node is online during this procedure (C):This is also correct. The upgrade can be performed while the node remains online, minimizing disruption to the system's operation and ensuring continuous availability. These procedures are documented in the "HCP G10 Maintenance and Upgrade Guide," which outlines the steps for online upgrades and automatic RAID configuration.

To upload a software update package to an HCP S10, an SFTP (Secure File Transfer Protocol) connection is used. SFTP provides a secure way to transfer files between the administrator's machine and the HCP S10 system. This method ensures that the package is securely transmitted and prevents unauthorized access during the upload process.

Hitachi Vantara Content Platform Installation References:

The HCP S10 system requires secure methods for software updates, and SFTP is the recommended protocol for its ability to provide encryption and secure file transfer.

To configure host group security on a new HCP G10 with attached storage, the World Wide Port Name (WWPN) is required. The WWPN is a unique identifier for each Fibre Channel port in a storage area network (SAN) environment. It is used to configure access control and define which hosts can communicate with specific storage resources. This setting ensures that only authorized hosts can access the storage, enhancing the overall security of the HCP system. This requirement is documented in the "Hitachi Vantara HCP G10 Storage Configuration Guide."

ForHCP G10 nodes, the default password to access theBIOSis set tohosyu95. This is a standard password used for initial access to the BIOS settings, allowing administrators to configure the basic hardware settings of the HCP node.

BIOS Access:The BIOS is the first layer of system settings that control how the hardware operates before the system boots into the operating system or the HCP software. Accessing the BIOS is usually necessary during the initial setup or hardware maintenance of HCP nodes.

Security Considerations:After initial setup, it is highly recommended to change the default BIOS password for security reasons. Using default credentials like "hosyu95" can expose the system to potential unauthorized access if left unchanged.

The default password is documented in theHCP G10 Installation Guidesprovided by Hitachi Vantara, which emphasizes the importance of securing this access after deployment.

References:

Hitachi Vantara HCP G10 Installation and Administration Guide

Hitachi Vantara HCP G10 Security Configuration Best Practices

To upgrade a four-node HCP G10 cluster to an eight-node cluster, the customer can use additionalG10orG11node models. The HCP platform supports the addition of both G10 and G11 nodes in the same cluster, as they are compatible with each other in terms of architecture, management, and functionality. This allows the cluster to be scaled up by adding more nodes of either model to meet growing storage and performance needs.

Hitachi Vantara Content Platform Installation References:

When expanding an HCP G10 cluster, it is crucial to use node models that are supported and compatible with the existing cluster configuration, such as G10 and G11.

The maximum number of drives supported in one HCP S10 enclosure is 60. The S10 enclosure is designed to accommodate a large number of drives to provide significant storage capacity in a relatively compact form factor. This drive density is essential for scaling storage in environments that require large data volumes. This configuration is detailed in the "HCP S10 Hardware Configuration Guide," which outlines the specifications and capacities of the S10 enclosures.

The most cost-effective solution for a customer requiring 2 PB of usable capacity isHCP G10 with local storage and one S30 node (B).This configuration leverages the local storage of the G10 along with the large storage capacity provided by the S30 node, which is optimized for large-scale, cost-effective storage. The S30 node can store a significant amount of data, making it a suitable choice for achieving the required capacity with fewer nodes, reducing costs. The "HCP G10 and S30 Configuration and Sizing Guide" provides more details on cost-effective configurations for various capacity requirements.