HPE6-A72 Aruba Certified Switching Associate Exam Question and Answers

The command will fail because rollback commands must be issued from global-config mode.

The switch will revert the running-configuration to the checkpoint called 'start1without a reboot.

The command will fail because it is incomplete.

The switch will use the checkpoint 'rollback1as the starting configuration on next reboot.

Access-2# configure

Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure

Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure

Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

Access-2# configure

Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit

Access-2(config)# vsf renumber-to 2

This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.

Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC

power adapter to draw power.

PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.

write memory

save

copy config config1 config startup-config

copy running-config startup-config

copy running-config checkpoint boot-config

netstatus

traceroute

ping

pathping

tracert

SSID

DNS server IP

Subnet Mask

LLDP-MED

VLANID

Better Core router performance by offloading processing

Shifting endpoint access to the Aggregation layer from the Access layer

Using access control lists (ACLs) at the Core to improve performance

Connecting WAN/MPLS and Data center access to the Aggregation layer

1/1/8, 1/1/10, 1/1/5-1/1/24

1/1/1-1/1/28

1/1/1-1/1/24

1/1/8-1/1/10, 1/1/5-1/1/28

a discovery protocol used between Layer 3 devices to determine routes within a single autonomous system

a standardized IPv6 neighbor discovery protocol used to replace the ARP and broadcast mechanism used in IPv4

a standardized protocol for communicating directly-connected device information and capabilities.

an Aruba proprietary discovery protocol supported in all Aruba switches along with Cisco Discovery Protocol or CDP

Option A

Option B

Option C

Option D

Core(config-if-vlan)# vrf attach Green

Core(config-if-vlan)# ip vpn-instance Green

Core(config-if-vlan)# ip vrf forwarding Green

Core(config-if-vlan)# routing-context Green vrf

Aruba 8400

Aruba 8408

Aruba 6410

Aruba 5412r

11010101

10110001

01001011

11111000

Rolling back to a prior checkpoint triggers a reboot of the switch.

Stacking switches using VSF or VSX will disable the Checkpoint feature.

A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.

System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.

Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.

BGP

LLDP

OSPF

MPLS E. 802.3ad

A close-up of words Description automatically generated

A black text on a white background Description automatically generated

A black text on a white background Description automatically generated

A black text on a white background Description automatically generated

The command end

pressing ctrl+w

The command quit

The command exit

a pair of fiber optic strands allowing transmit on one and receive on the other at the same time

a mobile phone call

point-to-point connections between two switches allowing concurrent transmit and receive

CB radio using push-to-talk

Control and Provisioning of Wireless Access Points (CAPWAP)

Generic Routing Encapsulation (GRE)

Lightweight Access Point Protocol (LWAPP)

Process Application Programming Interface (PAPI)

The command inventory

The command version

The command show running-configuration

The command show system

show interface physical

show interface transceiver

show inventory

show interface optics

show interface vlan 1111

show interface 1/1/1

show interface gigabit 1/1/1

show vlan 1111

a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

any switch that supports PoE, LLDP-MED and Flow Control

has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

Starts an automatic page scrolling effect that pauses for a few seconds every 30 rows.

Enables a terminal notification when a new debug event occurs for L2MAC events.

Shows a new terminal window opening to allow typing while debugging occurs.

Results in a page break to disable the default continuous scrolling In the console.

SNMPv2c

HTTPS

USB-C console

Telnet

SSH