HPE2-T37 Using HPE OneView Question and Answers

Networks

To add a rack system to HPE OneView, you can define it manually using the HPE OneView interface. This involves creating a new rack resource and specifying its properties, such as name, size, and location. Manually adding racks allows you to organize and visualize your physical infrastructure within HPE OneView, even if the rack contains devices not managed by OneView.

Option D (Correct): Racks can be manually added via the HPE OneView user interface.

Option A: No special license is required to add racks.

Option B: Racks are not automatically discovered; only devices within the racks may be auto-discovered.

Option C: Rack definitions are not limited to HPE Synergy components.

Before moving a server profile to another server in HPE OneView, the target system must be powered off. This is required to ensure that the profile settings, including firmware, BIOS settings, and connectivity configurations, are applied correctly without any conflicts. Powering off the target server prevents any operational disruptions and ensures a smooth transition of the server profile.

Only an Infrastructure administrator can restore an appliance from a backup file.

To visualize the rack system and the Aruba top-of-rack switches in HPE OneView, the customer should define the switches as unmanaged devices manually. By adding the Aruba switches as unmanaged devices, they become part of the rack layout within HPE OneView, allowing for a comprehensive visual representation of the physical infrastructure.

Option A (Correct): Manually adding switches as unmanaged devices includes them in rack visualizations.

Option B: HPE OneView does not automatically discover and add third-party switches via hardware discovery.

Option C: Unless specifically supported, Aruba switches cannot be added as managed devices.

Option D: Monitored devices require SNMP support and integration, which may not be available for these switches.

When utilizing 25Gb connectivity for all HPE Synergy compute nodes, the maximum number of frames that can form a single logical enclosure is 3. This limitation is due to the bandwidth and port constraints associated with 25Gb interconnect modules. Logical enclosures define the management and networking domains within the Synergy infrastructure, and adhering to these limits ensures optimal performance and reliability.

Scheduled to be uploaded to the remote location.

During the HPE Synergy hardware discovery process in HPE OneView, the trap destination to HPE OneView is configured on the iLO management processor. This setting ensures that the iLO sends SNMP traps and alerts directly to HPE OneView, enabling centralized monitoring and alerting.

Option D (Correct): The iLO is configured to send traps to HPE OneView during discovery.

Option A: HPE Remote Support is not configured automatically during hardware discovery.

Option B: Active Directory integration is set up separately and is not part of the discovery process.

Option C: Security modes are not configured during the initial discovery.

HPE GreenLake for Compute Ops Management - OneView Edition can be used free of charge for the HPE Synergy platform because the licenses are included. This means that customers using HPE Synergy systems receive the benefits of HPE OneView management capabilities without additional licensing costs.

Option A is incorrect because HPE OneView versions do not align with version 8.40; as of the knowledge cutoff in 2023, HPE OneView versions are up to 6.x.

Option C is incorrect because the availability of the service is not restricted to customers with more than three HPE Synergy frames.

Option D is incorrect because HPE ProLiant G6 servers are not supported by HPE OneView; support typically begins from Gen8 servers onward.

Your customer can obtain the PowerShell Library for HPE OneView by downloading it from the Microsoft PowerShell Gallery. The library is publicly available and can be installed using standard PowerShell commands. This allows users to automate and script HPE OneView operations, enhancing efficiency and integration with existing workflows.

Installation Command:

Install-Module -Name HPOneView.XXX

(Replace 'XXX' with the specific version number)

In HPE OneView, you can configure the iLO Federation Group parameter using a server profile. This setting allows you to assign the server's iLO to a specific federation group, enabling features like group power control and firmware updates across multiple servers. By configuring this parameter within the server profile, you ensure consistent iLO settings across all servers that use that profile.

Option A (Correct): iLO Federation Group can be set in the server profile to organize iLOs into groups for collective management.

Option B: The iLO firmware repository is managed separately and is not configured via server profiles.

Option C: Active Directory integration is a global setting configured at the appliance level, not per server profile.

Option D: Access to the remote console is managed via iLO user permissions, not directly through server profiles.

Virtual Connect will pass through all tagged packets without modification, and it will be the responsibility of the teaming software to strip/add tags.

An iLO in an HPE ProLiant server can obtain an IP address from the subnet and address range defined in the HPE OneView settings. HPE OneView allows administrators to define IP address pools for various components, including iLO management addresses. When a server is added to HPE OneView, it can automatically assign an IP address to the iLO from the predefined range.

Option A: Storage arrays typically have their IP configurations managed separately.

Option B: Rack Management Controllers may not be configured using IP pools in HPE OneView.

Option C: HPE Synergy compute nodes use a different method (the Frame Link Module) for management network configuration.

High Available when the modules are in different frames. Redundancy is when the modules are in the same frame.

Management - OneView Edition. This offering integrates HPE OneView's management capabilities with the HPE GreenLake cloud platform, providing advanced compute management for modern ProLiant servers.

Option C (Correct): HPE ProLiant Gen10 and newer systems are compatible with this service.

Option A: ProLiant G6 servers are legacy systems and are not supported.

Option B: While HPE Synergy compute nodes are managed by HPE OneView, this specific edition focuses on ProLiant servers.

Option D: HPE Superdome Flex servers are not included under this particular management edition.