HPE0-V14 Building HPE Hybrid IT Solutions (Rev. 19.41) Question and Answers

A customer is planning an upgrade to their network. They need to combine multiple existing switches into one virtual device.

Which technology should the customer configure on their existing switches?

You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.

How should you install the PDUs to maximize power distribution and space efficiency?

A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?

A customer needs to implement VMware across a few racks of servers. They anticipate a large amount of VM creation and retirement.

What are key technologies in a Top of Rack (ToR) switch that support this environment? (Choose three.)

You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.

Which HPE management solution meets the customer’s needs?

You are installing a rack at customer site.

How can you ensure redundant power to the rack?

A customer is standardized on high-density, rack-mounted servers. They have an application that requires 3 six-drive RAID6 groups and redundant 10 Gb NICs.

What is the highest-density server that meets these customer requirements?

You are working in a data center with multiple servers and need to update the iLO 5 user names and passwords on a regular basis.

Which tool enables you to streamline and automate this process?

You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.

How should you connect the switch to the network?

A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.

Which feature of MSA 2042 will help to improve iOP performance?

A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.

Which feature of HPE Gen10 servers offers these benefits?

A customer wants to decrease problem resolution time on their HPE infrastructure.

Why would this customer benefit from Insight Remote Support?

You are designing a solution to run a Citrix XenDesktop workload.

Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?

A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer's network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections. The customer is already over budget and needs to keep costs down.

Which option should you recommend Tor connecting to the switch?

Which HPE service level offers customers special parts handling and access to onsite service 24x7, including HPE holidays?

Which tool provides a report on the current usage levels and life span of some installed read-intensive flash drives?

A customer requests a quote for an HPE storage solution that meets the following requirements

• Fully redundant dual-controller storage array with no single points of failure

• 10GD iscsi connectivity

• At least four host-facing iscsi ports

• Guaranteed 6-nmes data availability

Which HPE storage solution should you propose?

You are troubleshooting server issues and need to troubleshoot when online and offline.

Which HPE tool should you use?

You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.

Which HPE ProLiant Gen10 feature set will address this customer’s needs?

A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.

Which solutions would HPE recommend to meet the customer needs? (Choose two.)

A customer wants to optimize the performance of its storage array by moving data residing in one class of disks to a more appropriate class of disks based on data access patterns without manual intervention.

Which HPE storage technology/feature will meet the customer requirement when the data is stored on an HPE Primera storage?

When should you choose to populate a server with LRDlMMs?

A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller

Which tool can display an Array Diagnostic Report?

A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Refer to the exhibit.

A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.

The customer is now experiencing performance issues.

Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

Which factors are used to determine RAM configuration maximum memory capacity? (Choose two.)

What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

A customer has a single HPE ProLiant Gen 10 server.

Which embedded management tool should they use to monitor the server?

A customer acquires an HPE 3PAR Storeserv 8200 Solution for a data center environment with the following configuration:

• 2 Controllers Nodes
• Physical Service Processor
• 2-tier configuration using 16 SSD and 12 NL HDD
• 2 SN3000 San Switch each with 24 FC ports

After installation and configuration, the storage is put in production. When tiering with the Adaptive Optimization SW is being performed, the customer encountered performance differential issue.

What could be the cause of this issue?

A customer needs an HPE Nimble storage solution with 100TB capacity. They want to be able to add more disk capacity if needed

Which HPE tool can help you validate the proposed storage solution and that it is supported by HPE?

Which HPE feature enables the customer to achieve this A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.

server performance improvement?

You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:

• Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit
• HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit
• Two SN3000B FC Switches

Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?

A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.

Which HPE ProLiant server solution meets the customer’s requirements?

A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.

Which HPE management offering meets the customer’s needs?

Refer to the exhibit.

Drag the correct protocols from the left to the appropriate area on the topology on the right.

A customer needs to move from their traditional tape-based backup infrastructure to a standalone application to disk based backup solution using HPE StoreOnce. The environment does not use a hypervisor.

The customer has the following goals for their long-term backup retention:

• retain data for over two years at low cost
• data is archival and rarely accessed, if ever

Which HPE StoreOnce components can help meet the customer goals in the most cost effective manner? (Choose three.)

Which protocol should be used to access an exported directory on a network-attached storage device?

You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs

interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50

Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

What is a benefit of a NAS device?

A customer ordered a pair of HPE SN3000B 16 Gb Fibre Channel Switches to provide Fibre Channel connectivity between VMware ESXi hosts and HPE 3PAR StoreServ 8200.

Which adapter i s required to support Fibre Channel connectivity from the VMware ESXi hosts to the new switches?

An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.

Which HPE software tool should the customer use to minimize the time required to perform this activity.

Match each ProLiant solution to its ideal use case