New Year Special Sale - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: mxmas70

Home > HP > HPE ASE > HPE0-J68

HPE0-J68 HPE Storage Solutions Question and Answers

Question # 4

A customer is deploying a new StoreOnce VSA solution.

How can the necessary storage capacity be added to the VSA? (Choose two.)

A.

Verify sufficient capacity LTUs are available

B.

Add a new virtual hard disk to the virtual machine

C.

The Cloud bank container needs to be configured once the VSA boots

D.

The Cloud bank container needs to be configured from the vCenter client

Full Access
Question # 5

A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected

via FC and the rest are connected via a WAN.

Which backup target type should you recommend?

A.

VTL

B.

S3

C.

CIFS

D.

Catalyst

Full Access
Question # 6

Refer to the exhibit.

You are designing a new Primera solution and demonstrating performance numbers to the customer. The customer reviews the configuration and requests a change to the configuration that will increase Random Write IOPS.

Which action will satisfy the customer request?

A.

Add more disks of smaller capacity

B.

Upgrade the HPE Primera base model

C.

Change to larger SSDs

D.

Add more FC Ports

Full Access
Question # 7

A customer uses Veeam to backup their entire datacenter.

Which Veeam feature allows them to recover a single email from their Exchange server?

A.

Changed block tracking

B.

Explorer for Storage Snapshots

C.

Data Mover Service

D.

SureBackup

Full Access
Question # 8

You are designing a new HPE 3PAR StoreServ solution.

Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?

A.

One Config Advanced

B.

SAF Collect

C.

NinjaSTARS

D.

Storage Sizing Tool

Full Access
Question # 9

Match the feature to the appropriate C-Series DCNM license type.

Full Access
Question # 10

Match each address with the associated address type.

Full Access
Question # 11

A customer successfully implemented an HPE Primera solution.

Which tool can be used to verify achieved savings from deduplication and compression in the customer solution?

A.

NinjaSTARS

B.

3PAR Service Processor

C.

NinjaCrawler

D.

StoreServ System Management Console

Full Access
Question # 12

You are designing an HPE MSA iSCSI for a customer.

Which components are typically part of the solution? (Choose two.)

A.

Drives

B.

SFPs

C.

Service Processor

D.

All-inclusive Multi-system software

E.

Switch zones

Full Access
Question # 13

Refer to the exhibit.

A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.

The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.

Which addition to the Primera should you recommend?

A)

B)

C)

D)

A.

Option A

B.

Option B

C.

Option C

D.

Option D

Full Access
Question # 14

You want to deploy Recovery Manager Central to a customer environment.

How can you accomplish this? (Choose two.)

A.

Install RMC on top of the virtual or physical RHEL system using the GUI wizard

B.

Deploy an RMC virtual appliance to Microsoft Hyper-V hypervisor

C.

Deploy RMC on top of the virtual CentOS system using the CLI

D.

Deploy RMC on top of the virtual CentOS system using the GUI wizard

E.

Install RMC on the top of the virtual or physical RHEL system using the CLI

F.

Deploy an RMC virtual appliance to VMware ESXi hypervisor

Full Access
Question # 15

A small company has recently purchased an MSA and two B-series SN3000B switches. In an effort save money, they installed the solution themselves. They call you complaining they can now see the multiple volumes on the MSA after creating just a single volume.

What should you advise them to do?

A.

Enable Smart SAN on the MSA 2052

B.

Set volume’s tier affinity to Performance

C.

Enable zoning on the SN3000B switches

D.

Enable MPIO on their host

Full Access
Question # 16

A customer is planning to replace their existing LTO-6 tape library with a new HPE StoreEver MSL2024 tape library. They want to reuse their existing LTO-6 tape cartridges for reads and writes.

What is the latest tape drive technology that will provide backward compatibility?

A.

LTO8

B.

LTO5

C.

LTO6

D.

LTO7

Full Access
Question # 17

A customer successfully implemented an HPE Primera solution.

Which tool can be used to verify performance counters, such as IOPS, match customer requirements?

A.

NinjaCrawler

B.

OneView

C.

Recovery Manager Central

D.

Primera on-node management GUI

Full Access
Question # 18

Which of the following are part of the SimpliVity Data Virtualization Platform architecture? (Choose two.)

A.

Presentation Layer

B.

User Management Layer

C.

Security Layer

D.

Data Management Layer

Full Access
Question # 19

Match the MSA architecture components with their descriptions.

Full Access
Question # 20

A customer currently runs MSA 2040 SAS storage system with SFF drives. They are planning a hardware refresh. The customer is using virtual pools only, and is concerned about problematic data migration

to the new platform.

How can the update to MSA2050 be performed?

A.

Peer migration license must be purchased for the online migration

B.

Peer migration license must be purchased for the offline migration

C.

Existing drives can be moved to the new system; both systems need to be online

D.

Existing drives can be moved to the new system; both systems need to be offline

Full Access
Question # 21

Refer to the exhibit.

You are configuring a new HPE array and verifying properties of a set of volumes.

Which RAID level is used on the VMwareDatastores-GF volume?

A.

RAID 0

B.

RAID 6

C.

Triple Parity+

D.

RAID 5

Full Access
Question # 22

A customer wants to implement a new storage network, but wants to retain the ability to connect with legacy fiber channel-based components.

Drag the appropriate component to each box on the diagram to design a new storage network.

Full Access
Question # 23

Which actions can be done within InfoSight Cross-Stack Analytics for VMware and Hyper-V? (Choose two.)

A.

View replication policies

B.

Find noisy neighbors

C.

Locate inactive VMs

D.

Modify administrative privileges

E.

Review backup schedules

Full Access
Question # 24

What is the purpose of WWN in FC SAN? (Choose two.)

A.

Identification of zone members

B.

Identification of entities denied access to a volume

C.

Identification of entities via Storage Name Server (SNS)

D.

Load balanced frame delivery

E.

Forward translation of DNS entries

Full Access
Question # 25

A customer has a Nimble HF40 and needs to create a support ticket.

Click the option in the InfoSight portal where the customer can perform this task.

Full Access
Question # 26

Which protocol can be used for accessing StoreOnce VTL target from Veeam?

A.

FC

B.

NFSv4

C.

iSCSI

D.

SMBv3

Full Access
Question # 27

Which tool is used to provide centralized management of 3PAR and Primera arrays?

A.

SMU

B.

Primera UI

C.

WebUI

D.

SSMC

Full Access
Question # 28

Which feature allows HPE Primera, HPE Nimble, and HPE XP arrays to work with third-party management tools?

A.

REST API

B.

Data Protection Manager (DPM)

C.

StoreServe Management Console (SSMC)

D.

Service Processor

Full Access
Question # 29

You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.

Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)

A.

quick RAID rebuild

B.

deduplication

C.

compression

D.

encryption

E.

triple party

Full Access
Question # 30

A customer wants to make a full copy replica of a database to use for performance testing.

Which technology should they use to create the copy?

A.

deduplication

B.

snapshot

C.

clone

D.

synthetic full

Full Access
Question # 31

Select the correct initiation option for each HPE Primera function.

Full Access
Question # 32

Refer to the exhibit.

You create two snapshots of a thin provisioned base volume in an HPE Primera. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram.

Place the actions on the left into the order they are taken on the right.

Full Access
Question # 33

Which tool is used to determine current compaction ratios on Primera arrays?

A.

WebUI

B.

Storage Management Utility (SMU)

C.

NinjaStars

D.

SSMC System Reporter

Full Access
Question # 34

You are installing an HPE 3PAR StoreServ solution and need to integrate the array with the 3rd party monitoring application customer is using.

Which technology can be configured at 3PAR to support forwarding events from the array to the customer’s monitoring application?

A.

IPMI

B.

NTP

C.

SNMPv3

D.

DMI

Full Access
Question # 35

A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase-Т adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new

adapter is not configurable.

What is the most likely reason for this issue?

A.

The StoreOnce software requires updating

B.

Secure boot must be enabled in the BIOS to securely enable HBAs

C.

The customer failed to install a License to Use (LTU) for it

D.

The StoreOnce needs to connect to InfoSight to validate the adapter authenticity

Full Access
Question # 36

A customer implemented the HPE StoreEver MSL6480 Tape Library.

Which HPE Software can the system administrator use to check the health of the library and monitor its utilization?

A.

OneView

B.

StoreServe TapeAssure Advanced

C.

StoreEver Data Verification

D.

InfoSight

Full Access
Question # 37

You need to create an N:M relationship between VMware hypervisors and virtual volumes with the least amount of administrative overhead.

Click the option where you can create a group of VMware hypervisors for volumes provisioning.

Full Access
Question # 38

You are configuring a new HPE 3PAR solution and need to create a new disk group with a defined RAID level.

Click the appropriate option where the RAID can be selected.

Full Access
Question # 39

You deployed and configured an all-flash Nimble array. The customer wants to attach their Windows-based server to the array.

Which HPE tool can you use on the host server to make the integration easier?

A.

StorServe Management Console

B.

Channel bonding

C.

Connection Manager

D.

Centralized Management Console

Full Access
Question # 40

Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)

A.

Encryption

B.

Cloud Bank

C.

Catalyst

D.

VTL/NAS replication

E.

Flexible I/O HBAs

Full Access
Question # 41

A customer needs a centralized solution for storing departmental data to be accessed by Windows-based laptops and other personal devices.

Which solution should you recommend?

A.

Block storage, directly accessed over FC

B.

Block storage, directly accessed over SAS

C.

Object storage, accessed over S3 connector

D.

File-oriented storage, accessed over SMB

Full Access
Question # 42

You are designing a new enterprise array solution. The customer is interested in a caching tier that provides extremely low-latency and persistent storage at the same time. They also need to support more

than 500GB.

Which technology should you recommend?

A.

DRAM

B.

SRAM

C.

NVMe SCM

D.

NAND SSD

Full Access
Question # 43

Which statement is true when defining object storage ?

A.

It is most suited for sharing files and characterized by volumes

B.

It is most suited for unstructured data and characterized by file share protocols like NFS

C.

It is most suited for unstructured data and characterized by containers or buckets

D.

suited for database It is most and characterized by containers or buckets

Full Access
Question # 44

What are the benefits of the Persistent Cache feature?

A.

Internal validation of checksum for data kept in cache

B.

Ability of cache to retain content without power

C.

Ability to relocate a cache module to a new array to keep private keys

D.

Automatic write cache mirroring in case of partner-node failure

Full Access
Question # 45

You are designing a new HPE 3PAR StoreServ all-flash array for the customer.. Which ratio

should you expect to have the highest efficiency?

A.

Read/write ratio

B.

Reclamation ratio

C.

Compaction Ratio

D.

Thin provisioning ratio

Full Access
Question # 46

You are required to create a configuration for pricing for a customer solution for a primary storage use case. Which HPE tool can you utilize to create the required output?

A.

SAF

B.

Ninja Stars

C.

OCA

D.

CloudPhysics

Full Access
Question # 47

Which HPE storage array offers the ability to survive any three disks failing at the same time?

A.

HPE Alletra 5000

B.

HPE Alletra 9000

C.

HPE GreenLake for Block Storage MP

D.

HPEXP

Full Access
Question # 48

How does HPE StoreVirtual DSM for windows enhanced Microsoft windows native MPIO?

A.

It automatically create an I/O path to each storage system in the cluster

B.

It automatically adjusts transfer block

C.

It automatically combines HPE thin provisioning and volume migration technology

D.

It automatically adjusts the availability bandwidth between the switch and the array

Full Access
Question # 49

A customer need to server 40TB via file protocols including SMB and FTP to a board range of

client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?

A.

HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway

B.

HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona

C.

HPE StoreOnce 5500with data in fight encryption .

D.

HPE XP7 storage with encryption ready disk adapters

Full Access
Question # 50

Your customer would like a new primary array and requires protection of a volume on a different storage system in another location. Which technology should the array include?

A.

Deduplication

B.

Replication

C.

Tiering

D.

Snapshots

Full Access
Question # 51

A customer with an HPE 3PAR StoreServ needs to upgrade their aging backup solution to a more advanced solution using snapshots and deduplication.

Which HPE products would meet the customer’s needs? (Choose two.)

A.

HPE 3PAR File Persona

B.

HPE StoreEver

C.

HPE 3PAR Remote Copy

D.

HPE StoreOnce

E.

HPE Recovery Manager Central

Full Access
Question # 52

During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE

SN6000B switches. Which port mode must be set enable communication between the

switches?

A.

N_PORT

B.

FL_PORT (WRONG)

C.

F_PORT

D.

E_PORT (Correct)

Full Access
Question # 53

Which backup target will achieve protection from ransomware attacks by decreasing the opportunity for backups to become encrypted?

A.

Catalyst Store backup repository

B.

Exported RW storage snapshot

C.

NAS backup repository

D.

DAS backup repository

Full Access
Question # 54

How can an IT administrator access the HPE Alletra dHCI Stack Manager for managing their HPE Alletra dHCI solution?

A.

Via HTML5VMwarevSphere client

B.

Via HPE Alletra 5000/6000 CLI

C.

From Alletra 9000 on-array Management Ul

D.

From fabric manager

Full Access
Question # 55

What is the maximum number of controller nodes that will fit into an HPE Alletra 9000 storage base?

A.

8

B.

4

C.

6

D.

2

Full Access
Question # 56

Recommend a software stack for changing a backup platform that includes pay-per-use, supports backup of virtualized workloads provided by HPE GreenLake, offers low RPO in minutes, supports HPE AUetra 9000, and integrates with DSCC.

A.

Veeam Backup and Recovery

B.

Recovery Manager Central

C.

Zerto

D.

HPE GreenLake Backup and Recovery

Full Access
Question # 57

A customer has deployed an HPE 3PAR StoreServ 8400 with two nodes and three additional

disk enclosure .They want to expand the solution with two additional nodes and three

additional disk enclosure ..What must you do to expand the customers solution?

A.

The new disks must be imported before the new nodes can be added

B.

The existing nodes need to be take Offline

C.

The system should be updated to the latest supported OS before the hardware expansion

D.

The new nodes and enclosure must be placed in an adjacent racks

Full Access
Question # 58

Users are complaining about poor performance with their Data Warehouse application.

What is an effective solution to increase their performance at minimal cost?

A.

HPE 3PAR Adaptive Flash Cache

B.

HPE 3PAR Priority Optimization

C.

HPE 3PAR Dynamic Optimization

D.

HPE 3PAR Adaptive Optimization

Full Access
Question # 59

A customer has a large amount of the data on their Primera that is mission critical. The business needs RPO to be under 5 minutes.

Which protection technology should you recommend?

A.

synchronous replication

B.

asynchronous replication

C.

archiving

D.

backup to tape

Full Access
Question # 60

A customer needs to upgrade their HPE storage environment, including driver and firmware levels and OS, to the latest version.

Where can you find the needed information about supported versions?

A.

HPE Storage Assessment Foundry

B.

HPE SAN Design Reference Guide

C.

HPE OneView

D.

HPE SPOCK

Full Access
Question # 61

Which value does an HPE Nimble solution provide in addition to other HPE storage solutions

A.

All inclusive software licensing over 5 years and additional capacity upgrades

B.

Upfront option for free controller upgrade after 3 years

C.

Flat support pricing for all hardware components

D.

Tier 1 and tier 2 phone support

Full Access
Question # 62

What is the benefits of HPE synergy(Select 2)

A.

It can present block storage services from HPE 3par as part of the resource pool

B.

It support up to 3 HPE store Virtual VSA nodes for storage RAID

C.

It can use HPE 3PAR file persona for objet storage

D.

It can compose and reclaim DAS storage

E.

It support HPE blade system C-Class Flex Fabrics Interconnect module (need to check)

Full Access
Question # 63

A customer need a backup solution to their virtualized environment .The backup solution

must be agentless ,hypervise independent and integrated with HPE storage solutions. The

solution must support Nimble snapshot and replication management. What products meets

the customer requirement?

A.

HPE storeOnce Recovery manager central

B.

Commvault Simpana Intellisnap

C.

Micro Focus Data Protector

D.

Veem Backup and Replication

Full Access
Question # 64

Which of the following actions should be performed if your customer cannot deploy vVols on their HPE GreenLake for Block Storage?

A.

Acquire a VMware Suite LTU

B.

Run the "setsys vVol 1" command on the array CLl

C.

Update the OS to release 3 (10.3) or higher

D.

Order a RAM upgrade pack

Full Access
Question # 65

An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak

business hours with an OLTP application. They have enabled tiering using all drive types.

What could be used to resolve the issue?

A.

Dynamic Optimization using tier 2

B.

Adaptive Optimization using tier 1

C.

Dynamic Optimization between tier 0 and tier 1

D.

Dynamic Optimization using tier 1

Full Access
Question # 66

What is the maximum number of 2240 2U NVMe expansion shelves supported by the HPE Alletra 9080 4-node storage?

A.

2

B.

6

C.

4

D.

8

Full Access
Question # 67

A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.

Which feature will address the customer’s concern?

A.

Persistent Checksum

B.

Persistent Cache

C.

Peer Persistence

D.

Persistent Ports

Full Access
Question # 68

Which Veeam feature allows you to automate validation of the backed up data?

A.

On-Demand Sandbox

B.

DataLabs

C.

Explorer

D.

SureBackup

Full Access
Question # 69

A large enterprise is experiencing exponential data growth of their existing Oracle databases.

They are concerned about their increasing backup windows and the risk of non-compliance

with recovery time objectives increase of data corruption in primary storage. Their primary

storage is an 3PAR Storeserv 8400,and their backup target is an HPE StoreOnce System.

Which HPE storage solution allow the customer to migrate this risk?

A.

RMC Express protect

B.

Catalyst in-Flight compression

C.

3 PAR remote copy

D.

StoreOnce unified deduplication

Full Access
Question # 70

You are planning an upgrade to a customer’s existing HPE 3PAR StoreServ 8200 to include 4-port 16Gb FC adapters. The servers are zoned to see the storage via four paths. The customer is concerned about storage availability during the upgrade.

Which statement is correct about performing this upgrade?

A.

When NPIV is enabled, the HPE 3PAR Port persistence will show all four paths to the servers.

B.

The MPIO service will do a failover, and the servers will continue to have access via two paths.

C.

Windows servers require host explorer is installed to ensure MPIO is unaffected.

D.

As long as MEM driver is installed on VMware vSphere, no path failures are seen.

Full Access
Question # 71

Which HPE storage family should you recommend for a hybrid array, utilizing both 55D and HDD media, supporting 512TiB of raw storage and centralized cloud-based management?

A.

HPE Alletra 5000

B.

HPE Alletra 6000

C.

HPE GreenLake for Block

D.

HPEXP8

Full Access
Question # 72

A customer need to update the local sever at each of their branches keep up with the

increasing demand for High-performance storage. The customer cannot afford to move to

SAN at each state. Which HPE storage technology can increase performance for this

customer?

A.

Smart Path

B.

SmartCache

C.

Adaptive Flash Cache

D.

Persistent Cache

Full Access
Question # 73

How does HPE GreenLake for Block Storage perform write operations caching?

A.

Data is buffered in NVDIMM

B.

Data is cached on DFC-hosted SSDs

C.

Data goes directly to space based on NVMe

D.

Data is stored in supercapacitor-protected RAM

Full Access
Question # 74

A customer currently has a CS1000H and wants to upgrade to a CS3000.

What must be considered before upgrading?

A.

This upgrade is disruptive and needs planned downtime.

B.

A capacity upgrade to a fully populated array has to be performed first.

C.

Timeless storage support is not offered for CS1000H entry-level systems.

D.

A controller upgrade to a CS1000F has to be performed first.

Full Access
Question # 75

You have configured a performance alert with the following command: "createsralertcrit port write»bps> TO00O.sumwrite_iops>5OOOO alert" Which of the following options will trigger the alert?

A.

If an array port has received more than 10 000 write IOPS and if the sum of all write I0PS for all ports exceeds 50 000

B.

If a host port has transfered more than 10 000 write IOPS or if the sum of all host write IOPS for all ports of that host exceed 50 000

C.

If an array port has received more than 10 000 write IOPS or if the sum of all write IOPS for all ports exceeds 50 000

D.

If a host port has transfered more than 10 000 write I0P5 and if the sum of all host write IOPS for all ports of that host exceed 50 000

Full Access
Question # 76

Based on the customer requirement for hybrid storage solution with fibre channel connectivity. What would you need to consider when proposing HPE Alletra?

A.

Alletra 6030 models and above is required for a hybird with FC connectivity

B.

Alletra 6000 flash to tier disk would need to be sufficient for the workload

C.

Alletra 5030 models and above is required for a hybrid with FC connectivity

D.

Alletra 5000 flash to disk ratio would need to be sufficient for the workload

Full Access
Question # 77

Which statement regarding fixed-block chunking options on HPE StoreOnce is true?

A.

It can be set on any type of HPE StoreOnce backup target

B.

It can be disabled at any time

C.

It is a Veeam-specific feature

D.

It has been available since HPE StoreOnce software revision 3.x

Full Access
Question # 78

Select the correct statement regarding the interoperability of different drive interfaces.

A.

SATA drives can be connected to the SAS backplane

B.

NVMe drives can be connected to SATA backplane

C.

NVMe only supports 15K enterprise-class disks

D.

SAS drives can be connected to SATA backplane

Full Access
Question # 79

Which 5SD controller component is responsible for wear leveling?

A.

SATA interface chip

B.

NAND memory controller

C.

DRAM

D.

Processor

Full Access
Question # 80

Which function is built into the HPE 3par OS and enable users to move data and workloads

between array without impacting applications, users, or services?

A.

Peer persistence

B.

Adaptive optimization

C.

Peer motion

D.

Remote copy

Full Access
Question # 81

Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)

A.

CIFS

B.

NTFS

C.

VFS

D.

ZFS

E.

NFS

Full Access
Question # 82

How can the capacity of an HPE StoreOnce 3620 be expanded?

A.

By adding disk enclosures

B.

By increasing internal drive capacity

C.

By adding a 3620 in slave mode

D.

By adding a 5660 in slave mode

Full Access
Question # 83

Which cloud/object-storage provide' can be used to deploy HPE StoreOnce VSA?

A.

Scality ARTESCA

B.

Microsoft Azure

C.

Scality RING

D.

Amazon AWS

Full Access
Question # 84

The customer is deploying a new HPE Alletra dHCI solution. Which tool can be used to discover the new HPE Alletra array?

A.

HPE Storage Setup Manager

B.

HPE GreenLake Data Ops Manager console

C.

HPE GreenLake Block Storage console

D.

HPE StoreServ Management Console

Full Access