H35-460 HCS-5G RAN V1.0 Question and Answers

If the NR base station cannot load the new BTS5900 base station configuration data at the remote end, which of the following solutions can be used for near-end data configuration?

The CPE Pro admin page supports multiple users logging in at the same time.

When using the ACT CFGFILE command to clear gNodeB data, which product type is recommended to choose?

When using CPE to perform single-station verification tests on NR networks, it is recommended to bring a portable one

gNodeB must configure transmission data before you can configure wireless data.

gNodeB implements X2 self-configuration via MME.

What is the application type used for gNodeB remote maintenance channel detection?

Which of the following parameters is related to the frequency domain position of the PBCH DMRS?

Which of the following is not a BBU veneer?

In general, which of the following base station equipment commissioning methods causes the longest DownTime?

What is wrong with the description of AAU5613?

Base station survey mainly includes two parts: base station site selection and detailed physical survey.

Which of the following models of power modules can be adapted to the BBU5900?

Regarding the DMRS of the PDSCH, what are the correct descriptions of the following? (Multiple Choice)

5G RAN 2.0 version gNodeB adds which MML command is used in DU cells?

gNodeB cell binding trace area ID Which is the MML command used?

In the Sub 3G band, the maximum number of SSBs in NR is 16.

IP QoS refers to a capability of the network, that is, on the IP network that spans multiple underlying network technologies, to provide the services required by specific services, in what aspects does it obtain a predictable level?

Only the 60kHz subcarrier bandwidth supports the configuration of extended CPs.

Before the gNode configuration is adjusted, in order to avoid alarm reporting and display in the network management foreground, the project status cannot be set to which of the following states?

Which of the following are the new types of RNTI in NR?

What is IMT-2020's vision for peak rates for 5G networks?

In the process of automatically obtaining an IP address through DHCP, what message information is involved in gNodeB?

Which device makes the judgment on the change of auxiliary station under the NSA architecture?

Execute "route add 10.10.10.0 mask 255.255.255.0 192.168.5.1 -p" in the cmd window of the test computer, which one describes the error below?

In the Sub 6G band, what is the maximum beam number of 5G SSB?

Which of the following command objects must be configured in the 5G RAN2.0 gNodeB Wireless Data Module?

5G RAN 2.0 version gNodeB logical cells and sector devices use the command ANDD NRDUCELLTRP to complete the binding.

The NR neighboring cell measurement event of the UE adopts B1, and the corresponding RSRP threshold value 35, which is the true level value?