USGBC LEED-AP-BD+C Exam Dumps - Actual Questions Answers

Achieving a minimum of 10 cooling tower cycles by increasing the level of make-up water treatment is the way to obtain the maximum number of points for Water Efficiency Credit, Cooling Tower Water Use. This credit aims to conserve water used for cooling tower equipment by encouraging the use of non-potable water sources and increasing the cycles of concentration1. The cycles of concentration are the ratio of the concentration of dissolved solids in the blowdown water to the concentration of dissolved solids in the make-up water2. Increasing the cycles of concentration reduces the amount of make-up water and blowdown water, and thus saves water and energy2. The credit has two options: Option 1. Non-potable Water Source (1 point) and Option 2. Cooling Tower Water Use (2 points). Option 1 requires using at least 50% non-potable water for cooling tower make-up water1. Option 2 requires achieving a minimum number of cooling tower cycles based on the quality of the make-up water, as specified in Table 1 of the credit requirements1. The maximum number of cycles is 10, which can be achieved by increasing the level of make-up water treatment to meet the criteria for conductivity, silica, and alkalinity1. Therefore, Option 2 is the way to obtain the maximum number of points for this credit. References:

Credit: Cooling tower water use | U.S. Green Building Council

Cooling Tower Evaporation Credits | WaterSignal

The scope of analysis in Materials and Resources Credit, Building Life-Cycle Impact Reduction, Option 4. Whole-Building Life-Cycle Assessment is a cradle-to-grave assessment. This means that the life cycle assessment (LCA) covers all stages of the building’s life cycle, from the extraction of raw materials (cradle) to the disposal or reuse of the building components at the end of their service life (grave)1. The LCA must include the following life cycle stages: product stage, construction process stage, use stage, and end-of-life stage2. The LCA must also account for the environmental impacts of the building’s structure and enclosure, as well as any other building elements that are permanently attached to and share service systems with the building2. References:

Whole building life cycle assessment through LEED v4

Building life-cycle impact reduction | U.S. Green Building Council

Building Product Disclosure and Optimization is based on market transparency, which means providing information about the environmental and social impacts of the products and materials used in the building. The LEED v4 Reference Guide for Building Design and Construction states that "the intent of this credit category is to encourage the use of products and materials for which life-cycle information is available and that have environmentally, economically, and socially preferable life-cycle impacts"1. By disclosing the information about the product ingredients, environmental product declarations, sourcing of raw materials, and material ingredients optimization, the project team can make informed decisions and support the development of a more sustainable market.

References:

LEED v4 Reference Guide for Building Design and Construction, Materials and Resources Credit: Building Product Disclosure and Optimization - Environmental Product Declarations, page 5462

LEED v4 Reference Guide for Building Design and Construction, Materials and Resources Credit: Building Product Disclosure and Optimization - Sourcing of Raw Materials, page 5502

LEED v4 Reference Guide for Building Design and Construction, Materials and Resources Credit: Building Product Disclosure and Optimization - Material Ingredients, page 5542